Search results

It's time. The upper bearings are rough, corrosion is taking it's toll. I don't have the enthusiasm to rebuild the drive while I'm doing the motor, lol. It's over 25 years old. I have enough tools. So I'm thinking of just doing a swap. Has anybody been running an SEI drive for a few...

I upgraded a worn QuadraJet this year, and opted for an electric choke rather than the hot-air/stove type. I'm getting conflicting info about where to tap power to the choke. Some say not at the coil, others say coil is ok, as long as it's a 12v Coil (It is). I'd prefer to wire a...

That time has come - I've rebuilt the heads this winter and the risers are getting somewhat marginal, so to the scrap heap they go, am changing out the manifolds as well. Generally I'd use ebasic power or perfprotech, but shipping all that weight seems like I'm just giving a bunch of money to...

Hello everyone - Does anyone have a source for these? Or perhaps a clean unique alternative? My starboard side is only in fair condition, the port side pretty much non-existent. -Brian

I've been considering a prop change - while the performance of the 16 x 16 Aluminum 3-blade is within spec (4500 WOT Rpms) - I'm wondering if low and mid-range performance and economy can perhaps be improved....here's why: The prop calculators I've tried here...

Particulars: 1985 Merc 260/MR Transom, Alpha One. San Juan MC304 FWC. Have the boat in the driveway this weekend doing the annual stuff. While running on the muffs I notice that cooling water is exiting only through the prop hub and the starboard opening in the transom. Check the elbows -...

Greetings all! I opened up my Alpha drive today to change out the impeller & found a significant amount of Columbia River bottom (& perhaps a wad of DB Cooper's cash) in the cavity in front of the pump housing (where the shift linkage passes through). Perhaps a half-cup of sandy, gooey mud...