Search results

Pretty much the same, a couple of whacks on each side and a good twist/pull and it comes out. Maybe try some anti-seize/galling compound made for aluminum?

I do not have your exact boat, but if you have a Vacuflush toilet the head system breaker turns on the vacuum generator which is needed to flush. If your ball seal, which opens and closes when you depress the foot petal, is leaking your toilet would empty. The clicking sound is most likely the...

Do you run an onboard generator?

I'm not all chain, but I did add 100' to my stock set-up. The locations I anchor in I always only have chain deployed. Definitively big improvement for my use. Only downfall I saw was at rest my smaller boat does sit slightly different from the added weight in the anchor locker, yours may not...

I believe he is saying if it is the coolant side the 15 PSI is accurate, not the 30 PSI. You most likely have a 16 PSI cap and if you truly had 30 PSI you would be in big trouble.

I hope not, can't afford 7 years of bad luck!

Definitely one route, I'll make a template for an exact fit. Do you recall what type of adhesive you used?

Mirror smashed when the adhesive failed and it fell off of the frame. Looks like it was glued flush to a backing with gold trim around the outer edge which was just decorative, no mechanical holding as far as I can tell. Roughly 2' X 2' with rounded corners. I find references to mirrors on the...

Bad fuel?

I'd say before you do anything "official" I'd have a good surveyor go through it and then be on it as well during the sea trial. Mike

For my personal space perspective with that same boat I'd say 6 all day no problem. 8 of the right adults are tolerably but starting to get a little crowded. Never had greater than 8 adults on board.

I agree with Dave, just kidding! I'm not personally familiar with the mouth of the Merrimack although I've heard conditions can get tricky. The number of safe passengers you carry is something you'll need to determine based on a few things IMO. At the end of the day, you're responsible for...

You can also add a rod holder, add (2) if you like symmetry although the port side is where you will grill.

Not sure if anyone has seen it yet, but definately something different. Pretty interesting concept and like everything else with some trade-offs. Here is a link: http://www.boattest.com/boats/boat_video.aspx?SubID=2456&ID=2752 Mike

Possibly condition of gas, leftover from last year? Had almost exactly the same symptoms. Went "trolling" to burn as much as possible before putting fresh gas in for the season. That was my first refill with new to me boat. After fill-up, no more problem. You would think both engines would...

Fishing rod holder. Installed a couple of holders myself, one on port and starboard. Works fine for me.

Only you can ultimately answer that question. The better purchase is the boat that suites your planned boating activities/usage? Think and talk with the admiral about what you both desire together, individually, and as a family. How frequent will you overnight? How many nights per stay when...

That's my guess, insufficient voltage to the inverter to produce the required output demand. Inverter kicked out.