I bought the 40 Sundance 2 years ago and I have it out for bottom painting. Anything that needs to be checked besides the obvious; props and shaft alignment while I've spent the money to have the boat hauled. Horizon 8.1 V Drives. Appreciate any input
So I contacted Coastal Marine Services (Dometic Distributor), in Savannah, GA. Found them on line. They pointed me to the dealer here in north Georgia. The original Coolomatic is no longer available. I will be replaced with a new unit and the dealer assures me it will look just like the old...
So I got the dealer to come and look at the fridge. Whatever you do, do not chip ice off the back cooling panel. My wife was doing her best to defrost. One small pin prick and it's toast. New replacement is only $1300 plus labor. Ugh! Next time she'll let it defrost naturally
I have a waeco Coolmatic RSD-115 it seems to be running but not cooling at all. I'm thinking the compressor is bad. Any other ideas or suggestions please.
So I swapped the old rule shower sump with an Atwood. The Atwood has integrated float switch as opposed to separate switch on the Rule. Only two wires on the Atwood connecting to 3 wires in the harness. The obvious is black to Black and brown and brown with orange stripe connect to brown from...