Search results

  1. Wendy & Jim

    Us Too Brought the boat up to CT. from Florida been put away for winter Starting to things...

    Us Too Brought the boat up to CT. from Florida been put away for winter Starting to things together to put back in water don't see too many 580 on the site
  2. Wendy & Jim

    Beautiful Boat

    Beautiful Boat
  3. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    found a clog in my heat exchanger, had the system flushed out and got my psi down to about 2 and my temp went to 159 so all seems well. thinking about doing the same to the other side its temp stays around 170. thanks
  4. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    Hi All so today while out on the sound I had a engine run hot (195) and got a alarm. after a couple minutes engine cooled down a little (181 star.) (165 port ) my water pressure gauge was reading high on the star. engine 14.7 and 4.6 on port at idle. port runs from 4.6 at idle to 22 at 3000...
  5. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    thanks kaz & jv I'll give that a try.
  6. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    I don't see any seacocks to close.
  7. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    great video thanks that guy must have used a lot of hacksaw blades. I see the clip with the hose. not your boat maybe they were sisters.
  8. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    don't know I brought the boat from a guy in CT but thru marine max. it's name was party of five. so with the flushing just run water no running of the engine.
  9. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    Hi All my engines have what I assume are flushing fitting on the right side of each engine I can't find the male adapter on the boat . how does every one use these fittings. been told to just hook hose to it and turn on the water but I would like to know the right way if possible. thanks
  10. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    Art we generally stay local to home but being that this is a new boat to us will be looking forward on going further. how bout you any favorite places.
  11. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    hi Art I haven't serviced mine. it makes a little noise but nothing to worry about. getting ready for some ran tomorrow.
  12. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    thanks Kas911 its great to have people so willing to help each other. I will check out in a day or two. strange thing is that the radio will turn on for about two minutes than shut down to aquire signal only on first turn on, also can get reg am and fm stations and yes it is a clarion. just odd...
  13. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    Hi guys so I called Sirius radio to change billing name on my fusion radio ip600 after reps made changes lost radio its just keeps say acquiring signal . now no radio and reps claim I have a problem with my radio or tuner my question is does anyone know where the tuner is before I start pulling...
  14. Wendy & Jim

    Official 330/350 (2008 and newer) Thread

    Hello from Ct. just joined and wanted to say hello to other 330 owners.
Back
Top