Search results

Everybody thanks so much for your help

I need to replace the Portlight Insect screens in my 2004, 260 Sundancer and they are hard to get here in Australia. Does anyone know who the manufacturer is in the States so I can order them on line

I am an experienced Boat handler, the problem with our boating here in Melbourne is that you generally do it with all the Clears up. With any windshift it can create a huge problem all of a sudden youre a sailboat, and with marina berths in critical shortage I have to take the one I have. I...

We get the Zero Point Light and then when we power on The top LED and then two of the trim tab lights either up or down and then nothing

I have a Sundancer 260 and have been moved in our Marina to a really pokey position and find it very difficult to manouver, and considering installing a Bow Thruster has anyone done this with any success

I have fitted the Bennett Auto tab Control to my Sundancer 260, I bought this unit from the States last year and have just fitted it, it is an AC3000 Unit. Although we can still get the tabs to control manually, when we set the ATC it won’t stay on. We get some lights but it seems to shut off...

Great Thanks

I have a Sea Ray 2004 260DA and the DC Converter Switch has failed on the Board. Does anyone know who makes the boards for Sea Ray so I can try for a new one as I am have a hard time here in Australia trying to replace the exact same thing. :smt021

Thanks everyone for their input. Just come back from a long Easter Break here in Australia and while we were away it was driving me mad especially in shallow water. I will try and disable the Trim Popup and move onto the leg sensor and wiring from there.

Mine is always moving up and down on the gauge without touching the button, so you dont really know where the leg is at. I'm not sure whwer to start looking in the loom behind the panel or at the sensor itself. But when the gauge moves up and down constantly the way it does all the other...

I have a Sea Ray 260 Sundancer with the Smartcraft System. The Trim Gauge is, whilst running at sea, all over the place going up and down but the leg is not moving. The leg still runs up and down by the button ok though. This is affecting the smartcraft system it jumps from one reading to...