In the Galley there is a Marvel Refrigerator and a Marvel Freezer. The refrigerator is starting to cool less and less every weekend. It does not need to be defrosted so that isn't the issue, and I believe it is a closed system so I am not sure about adding Freon.
The bottom line is it is 17...
If you saw I posted a thread regarding a drop in RPM's due to compression gases leaking past the #6 injector. While the Cat Mechanic was putting a site glass on the fuel line to look for bubbles he asked what type of Oil I have been using. I replied Rotella 15W 40. He told me that the 3116/3126...
Yesterday while crusing home on the Sassafras river with the Engine Sync on my port engine dropped from 1900 rpm's to 1400rpm's. I dropped the starboard back to match it at 1400 and it shot back up to 1900 and then back down to 1400. All filters are clean and new, I did not disengage the sync...
I am in the process of changing out the impellar on the raw water side of the genny. It is an 8 BTD and the impellar housing is in the rear of the genny. My wife can fit back there and can almost touch it with a long screwdriver to remove the 6 screws in the cover plate. I can't even get back...
Stored on land this year. Noticed as waxing that there were cracks in the gel coat on the starboard side of the bow. It looks as if water seeped in and froze over the winter. They resemble spider cracks. Fellow boater next to me noticed blisters in that area when checking on boats in February...
I have twin 3116 Cats that require special application oil. This oil was $14 a gallon last year, this year it skyrocketed to $31 a gallon. I take 14 gallons so you can imagine my shock @$434 for oil.
Is Cat pulling my leg that I have to use this oil or could I use a premium diesel oil like...
Hoping that Frank Webster will jump in on this one. I have what looks to be an upside down filter directly above the fuel filter. This filter looking thing connects with a rubber flange and goes to a metal pipe about 1 1/4 inch. Since I don't have the manual could this be a filter for the...
Suggestions, this ACR 100 spotlight has an internal geared motor made by Think Engineering Company LTD. I cannot find anything on this company on the web. The motor froze up and I need to replace it. ACR has been less than responsive. I don't want to spend $888.00 on a new spotlight when all I...
Hey guys, need a suggestion. I have a 42 SeaRay Aft Cabin with 3116 Cat 350 in it. I am looking for faster cruising speed. Currently I cruise at 2000 rpm's @ 18.5 mph. I currently have nybril 4 blade props @20 x 23. In my quest for more speed( 4-6 mph), I am looking into new props. Lens prop...
Hey Guys,
Wanted to upgrade TV, DVD and drop some surround sound in the salon. As dumb as this might sound, I can't get the old TV and VCR out of the cabinet:huh:. I spoke with SeaRay, and they stated to pry off the bottom trim which is attached with christmas trees (expanding toggles), then you...