Search results

Thank you Thank you

What type of resin would you use?

Thanks much. I assume I should replace the gasket on the glass on the hatch too? Having a hard time finding it

Th

Anyone rebed and replace gasket on forward hatch on a 2004 to 2007 340 Sundancer? I have a slight leak (1 drop every 30 minutes in heavy rain). Cleaned gasket (which is in not great shape on the hatch glass) so I want to replace that too. Should I just replace hatch with a new one and how hard...

Did you use gaugesaver? How did they do?

Mine all have micro cracks in them. It's the 4 in 1 gauges and the RPM gauges as I have smartcraft thanks in advance Joe Johnson

So will the Garmin RADAR mount on my existing Radar mount for my Raymarine unit?

I think all of you answered my question-Go with Garmin

Anyone replace their C80? Did you stick with Raymarine or move to a new brand? I am on the fence between Garmin and Raymarine (I know I will need to replace Raydome, transducer, etc no matter what brand. Anyone have thoughts on Garmin vs. Raymarine (Years ago, it was almost impossible to get...

Mine is located behind the small compartment to the right of the driver seat. Where the cup holder is. YOu need to remove the 4 screws to get to it

KevinC, I see you replaced the kitchen sink drain on your 340. Do you remember what you replaced it with. My kitchen sink drain is gross and corroded

yeah. Guy removed my seats in November. He is finally installing now due to COVID-19 shutdown. Read that you can use a heat gun, steamer and/or just the sun to get out the wrinkles. Don't know if that is true or not?

Hello, I just had the 3 bucket seats reupholstered on my 2003 340 Sundancer. The upholstery shop sent me photos of the seats (they are installing tomorrow) and I noticed some minor wrinkles around the curved edges of the buckets. Is this normal? I read that exposure to the sun will eventually...

Has anyone replaced the three bucket seats on a 2004 to 2006 Searay Sundancer 340? If so, where did you get them?

2003 Sundancer 340. Started up my engines. Both engine analog gauges show 159 degrees for port and starboard. Opened up Smartcraft. Showing 159 degrees for both port and starboard HOWEVER graphic is showing engine is overheating and it is blinking "HI" next to the starboard engine temp...

My shower sump was pumping slow so I cleaned it out. When I reassembled the sump and inserted check valve, the pump came on but would not pump the water. I replaced the pump thinking it was old and that did not fix it. I put the check vavle on but did not connect to the outside line and water...