Search results

Hi Bill, there are marinas and yacht clubs in Manila, Subic, and Cebu. Plus a few smaller ones in Punta Fuego and Puerto Gallera that don't offer power, only fresh water. I live in the Island of Negros in the mid ph. We don't have any boating facilities here. As for service, cat has...

Thanks Creekwood and Timeflys Sent from my iPhone using Tapatalk

Thanks again for the reply KnotEasy. That's the reason I'm asking you folks if you know anything about neptunus boats. Over here we don't get much choices to choose from. Maybe 1 or 2 boats are in the market at this time. I also wanted to gauge if I would be making the right decision. The...

Pietro, gofirstclass engines are 3406C's Sent from my iPhone using Tapatalk

How's the weather Ian?

Pietro, I am told that 3406E's generate 750hp's

Paul, thank you for your reply. We live in the Philippines where it takes an arm and a leg to get boats over here. I am told that the port engine took a brand new head. I have not yet asked for the reason for it. So what made you decide to choose a SR over the neptunus Paul?

katricol, creekwood, weekenderUSC, thanks for the inputs guys

FootballFun, I want to know if neptunus are as good as SR boats. Also if it would be wise to go from a 2000 to an older boat which is a 1997. Thanks.

batsuno, thanks. How are things your side of the world?

Aquadancer, thank you for your information. I hope she is a good as he says. Its lover your own though.

Gofirstclass, I find the 400 db small, slow, and under powered. I am going to sell the 400 db before buying the neptunus. Where I live there are no slips for marinas. I just moor my boat in the city port. Whats the difference between 3406C's and 3406E's? I am told it gives out 750 hp. Is...

Hi Folks. I am at a dilema right now. The previous owner of my 400 db is offering me his 62 Neptunus flybridge . My SR is a yr 2000 which cost me around 260k, while the Neptunus is a '97. She has 3406E's with 2,500 hours, brand new genny, bnew cruise air chilled water AC, bnew windlass...

I actually have a set of locally casted props made of manganese bronze at the moment. They are way too heavy compared to the old screws.

mistercomputerman, I'm still at the denial stage, if you know what I mean... I'd rather not talk about the incident. Twas pure negligence on my part. I admit it, it was my fault but would not want to discuss it since it hurts my feelings. :smt017

Hi Ian, how are you? Good luck on your trip, it surely would be fun especially if you get good fishing too. It has been quite stormy up and down your area lately. Stay safe mate!

ImpulseIII, sorry I did not state it clearly. I kinda hit a reef and broke a leaf on the port running gear. Bent a shaft and strut as well. :-(

Sorry Guys, I read things wrong, this is what is marked on my props; HY TORQ 22L24NI L-CUP

Thanks PMC. I can get into plane at 20 knots with 2400 rpms. WOT i can only top 23 knots at 2700. This is even with a light load, say half tanks of fuel and half tank of water. Emptied waste tank, 6 people on board. When I have over 3/4 of fuel and 3/4 of water, I need at least 3 people...

Hi Prosideus, thank you for the info. I see you have a later model 400db. Mine is a 2000. I dont know what engines you have on yours, i have the cat 3126's. Your props are a bit pricey. Anyways i will still try to get a quote from performancepropsinc . Thanks again.