Search results

Thanks for the reply’s I’m doing 2200 at about 18 knots

Can anyone tell me what they cruise at rpm and speed for a 2000 460 Sundancer with twin Cummins 6CTA8.3

Anyone have a problem with their counter rotating drive breaking a tooth on the drive gear ? On family vacation and broke tooth on a alpha1Gen II drive 400hrs on boat Mercury won't do anything extended warranty ended in May going to try insurance. Any info would be great.

Had Northstar hated it need one that works with Raymarine C70 any info would be great. Thanks Four'ds 2007 280Sundancer Twin 4.3 Alpha's

Bottom Line I get all my supplies on line at Ishopmarine.com their good all parts are mercruiser or you can also order quicksilver. FourD's 2007 280 sundancer 4.3MPI's Alpha's

Had same problem but the leak wasn't from the pump,the window in the head wasn't sealed from the factory so every time it rained or I washed the boat I would get water under the sump.I removed the window recaulked it and haven't had any water since. FourDs II 07 280 Sundancer Twin 4.3s Alpha's

PMC Had same problem on my 07 280 and got no info from anyone I asked. So started digging around and found it. It's located on the power steering cooler behind the engines, looking at the engine it's on the left it has a three wire plug on it. I've replaced two of them so far one on the port and...

Anyone know where to get the plastic screw caps that go on the screws of the cabin door. 2007 280Sundancer 4.3s Alpha1s 1999 245Sundowner FourWinns 1985 185 Regal

Anyone have a good way to remove saltwater barnacles from outdrives? Any info would be great. 07 280 Sundancer 4.3 Alpha 1's 99 Fourwinns 245 Sundowner 85 Regal 185 Bowrider

Looking for the best paint to use on drives in salt water on the east coast. Any info would be great. 07 280 Sundancer 4.3s Alpha drives

Anyone have a problem with window leaks during heavy rains? My port and starboard windows both leak it dosen't leak around the gasket it look like it's leaking around the window frame. Any info would be great . 2007 280 SD 4.3 Alpha's

Does anyone have info on the smartcraft gauge system on a 2007 280 sundancer with twin 4.3 mpi alpha 1's. The problem I'm having is the water pressure no one I've spoke to knows what it's supposed to run at. My starboard runs between 1.0 and 12psi my port stay at 0. The dealer has no answer for...

Does anyone know what the running psi should read on the gauge for the water pressure? I've contacted Mrecury and have gotten many different answers some say 40 psi is ok others say less when I first got the boat both engines ran about 2psi then as the season went on my port engine read 40psi...

Skolbe Just ordered filters from MTSPowersystems.com they have all parts for Kohler generators 2007 280 Sundancer

I know the feeling to bought a brand new 280 dancer got the runaround at MM to get the 20hr service done they said they did it and charged my credit card for it. I had made marks on the oil filters and they were never changed well alot of phone calls later got my money back and won't be dealing...