Search results

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Hey, does anyone have any experience on removing the R80 monitor from the dash. I am yet to try,but when I looked it over it was not obvious on how to remove it. Any ideas? Gus

Does anyone know how to remove the radar monitor from the dash of a 410 sun dancer. I know their has to be a proper method for this and any help would be appreciated? I am replacing the R80 pathfinder with a R80 pathfinder.:smt100

Is it a color monitor, and does the open array antenna come with it? And how much do you think you need for it.

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Thanks for your thoughts Mistercomputer. I'll take it apart and check to see if the screws are broken off inside.

Hi Zach, we spoke about your radar gear about 6 months ago or so . Im interested in your radar equipment that you are selling. My name is Gus Sideris and you can reach me at 402-677-1456. Gus

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Does anyone know how to tighten up the captains chair at the tube to base connection. I have a slite wobble. There is 4allen screws at the base,but they are already tight. So if anyone has a fix or a good...

Could you send me some pics? Also any details on screen size,and size of hole in dash.I have a 2000 410 and would like a color monitor. Thanks in advance

WTB a cockpit cover for a 2000, 410 sundancer. Call Gus at 402-677-1456.

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Congratulation on your new purchase. I hope you enjoy your 410 as much as I do. It is truly a great vessel. Gus

Well I pulled the end caps off the heat exchanger and it was pretty obvious what the problem was. The gasket at each end of the heat exchanger disintegrated, and was plugging the small holes on each end. That explains the difference in the volume of water coming out of the exhaust ports. Did I...

When I go back in a couple of weeks, I will check the amount of pure antifreeze in the system and if that is ok the heat exchanger is coming off. I will report back my findings. Thanks for the brainstorming session !!! Gus

I do not know if the engines water pump is original or not.It is not leaking like a water pump does on a car when it is going bad. But that is a good point. Is their any other way to check if the circulating pump is bad??? Thanks for your input! Gus

Replaced the hose from the sea valve to the strainer.Still hot.I ran a thick wire though all the holles in the trans.Cooler and the oil cooler. Still no change. So the next step is to pull off the heat exchanger and lake it to a radiator shop and have it cleaned. One new thing I did notice, my...

Is the sea valve between the sea strainer and the engine,and did you have to have someone in the engine room to detect it. I am going to the lake this weekend and will definitely check on this. Thanks for your input. Gus

The mechanic said he removed the hoses to check for obstructions and found none, I am not sure how he checked the flow. He checked the strainers and the though hull grill and said those were clear.He said they swapped he intake hoses and that changed nothing. And also the themostat. He also used...

My starboard engine at higher RMP is overheating,and if I bring the RPMs down around 2200 the temp will come back down. I have replaced the sea water pump,the thermostat seams to be fine and my mechanic says my water flows are fine. He says now the next step would be to remove the heat exchanger...

Thanks for your response . It sounds like a scan is in my future. I will write back with my findings. Gus

Thanks Larry for replying to my post. I have just changed the plugs with those plugs that are about $10 per plug from Marine Max and it still does it. I know what you mean by hunting,but it's not that. It's more of a drop off of power for a split second about every 10 to 30 seconds. But once...

I have a 2000 410 dancer with twin 454 mpi 380 hp gassers. The starboard engine has a slight rpm intermitant drop of maybe 100 rpm or a little more. Just enough to make my sync gauge jump around, and you can feel it if you are paying attention. When I throttle up real slowly it is not as bad or...

Thanks for the Navionics app.info I am going to checking to it. Gus