PlayDate
Well-Known Member
If all your basic colors are correct then:
Your wires = Westerbeke
Yellow/Red = Yellow/Red
Red/Violet = Red/Violet
White/Red = White/Red
Green = Red/White (Process of elimination)
Yellow = White (I'm guessing because it is shared on both switches)
It's easy enough to see where the Green and Yellow go to confirm the wires. I would also make the extra effort to make sure the basic colors go to where they are supposed to go. Then I would change out the switches to match the 2 switch Westerbeke diagram. Just my thoughts.
Your wires = Westerbeke
Yellow/Red = Yellow/Red
Red/Violet = Red/Violet
White/Red = White/Red
Green = Red/White (Process of elimination)
Yellow = White (I'm guessing because it is shared on both switches)
It's easy enough to see where the Green and Yellow go to confirm the wires. I would also make the extra effort to make sure the basic colors go to where they are supposed to go. Then I would change out the switches to match the 2 switch Westerbeke diagram. Just my thoughts.
Last edited: