Separate names with a comma.
That one stud up middle with the wing nut tells me it carbed. Maybe TBI at best.
Boy, That's a JOKE!! I'd like to nuke the lane hogs.
White elastomeric roof coating. Under $50/Gal at Home Depot. Worked for me. Needs plenty of drying/curing time though.
OK, now it's getting real cold, so I think I will tackle this in the spring. I did pull the hoses to drain the manifolds so I don't have to worry...
Follow up the scraper with Soft Scrub with bleach. I had the same problem.
I went down today and figured I'd start the project. First bolt on the bracket (lower one) was tight, but gave a bit then seemed to move a little...
1 1/4" hard wall.
Are you talking about anchoring? I wouldn't expect the windlass to take the stress at anchor.
You need to tie off to a cleat.
Came today. Under$60 from "ReplacementKits.com.
Looks perfect. Has wear plate, housing, impeller and bolts.
I made up a small light weight battery pack from 2 6volt emergency light batteries wired in series. Charges from my cars lighter socket. Easy and...
Alternator is toast.
I really hate the arch speakers when you're sitting aft of the helm. It's like wearing headphones when you are trying to converse with someone.
Found the kit on Amazon. Thanks all.
FYI, 16MM would be 5/8". 14MM is closer to 9/16". I work with metric every day.