Recent content by TMorgan 400 Fly

So I have ceiling panels in the salon that have come loose. Is there a good instruction video somewhere that shows how to remove replace the Christmas tree fastners?

Looks tight, but there is a sluice that runs from the upper helm, along the outer edge of the flybridge and drains back inside the the flybridge into one of the drain holes. It was filled with caulk and that caulk is starting to degrade. I'm not sure if there is a seam there, but I am prepping...

Anyone with a 2016-2018 FLY or Sundancer may have had this experience. Water started dripping from behind the ceiling panels at the back of the salon by the sliding doors. Recaulked every evident seam. Possibly emanating from the port side of the vessel, maybe from the area of the built-in...

That's right I guess it is square... Like I said, I stupidly kept them finger tight and lost them all, so it's held in place by the weight of the dinghy...

Apparently they are made by GHS. I have reached out to them and have not heard back. An extensive google search reviews another vendor https://ecruffmarine.com/ghs-lift/ who I have also contacted. I'm looking for quite a few pieces, so let me know if you had any luck.

Hey there. Rookie error. My answer was to leave the bolts (with the plastic threader) finger tight to easily adjust and remove... So, I'm wondering if you knew the vendor for the chocks shown in Irie308's post above. I need 3 replacement lock nut sets ... #learningfrommymistakesdaily...

Yes. Thank you. Have a service request into Quick.

Techmitch - you are right! I had the wrong OEM in my bag of dealer supplied manuals. It is a Quick Aleph 1000.

techmitch - I'm embarrased by that. In fact, I just assumed that the Project 1000 was the windlass, because I have the manuals in my stack of OEM materials from the dealer. It's a Quick Windlass, though. Thank you for pointing it out. That's actually a little more clear.

Thanks, Ttmott. I have a swivel. The chain isn't getting twisted and stuck gypsy. It's not the finger. There is a fall-safe mechanism that engages to arrest the turning of the gypsy itself when releasing the chain. I'm trying to decide if there is a missing or broken release mechanism. In the...

Not sure why they don't come through. I uploaded these through the forum's dialogue box, so they should come through (#newbie)

One of the great things about all of the mechanic shops in Ft Myers getting decimated by hurricane Ian is that I am getting to know my boat a lot better. 1.) Leaking a light green/blue slightly viscous fluid - what is it, and how do I replenish the reservoir on Cummins QSB 6.7 2.) I have a...

Vince - Thanks for this recommendation. For anyone else interested, David isn't there anymore, but the current manager was very receptive and knowledgeable. They do NOT currently have a stainless steel guy, so that's part of the continuing quest. The best news is I get to ride up past...

Same issue on a 400 FLY. Any luck with Sea Ray?