Recent content by Skicoop2

Thank you for your help. I’m going to test it tonight and see what I find.

Do you mean the connections to the switches or is there a panel back there?

Have you found a solution? I just walked out to check the boat during the hurricane and my bilge pump switch and all those to the right of it aren’t working.

2001 310 Sundancer. My bilge pump switch and all of the switches to the right of it don’t work. Worked two days ago and today nothing. Any thoughts please:).

2001 310 Sundancer w/2012 mercruiser 5.7 mpi Horizon engines. I can’t locate the slave selinoids on the engines. There’s one on the bulk head that appears to have both engines tied to it(I think for battery charging system). They aren’t next to the breaker where I thought they’d be. Any ideas...

2001 Sundancer with 2012 Horizon inboards. Does anyone know of a good video that shows how to remove the complete cool fuel unit? I attempted to just replace the pumps but a couple of the bolts sheared(great design). Can I disconnect the water line without sinking the boat(my seasick won’t...

I replaced the coil and ICM combo and it still does the same thing. Strange side note: The new icm is giving me a 2 beeps a min alarm the old one doesn't.

If the pressure is low then check filter, then pumps?

2001 310 Sundancer w/2011 5.7 mercruiser horizons. It has been very, very difficult to find a mechanic to come out to the boat and scan. Long story but I've been trying to get the scan done throughout the many posts. With that said, I really appreciate your patience and help. -The engine...

Finally worked up the nerve to start it:). It beeps twice every min or so. Didn't leave it on long enough to see if it would stall when it warmed up. The motor sounds great when running. I put the old coil on and it's one beep, starts, runs great(no beeps), and stalls when it warms up. Can...

I'd really appreciate it. Thank you!!

Do you know if you have original coils or if they've been changed?

I didn I didn't want to fire it up in fear I might fire it up . Hoping to find out what it's trying to warn me about first.

When I push the ignition switch on it beeps twice instead of once. No more than that. Except it's always been one beep and port is still one beep.

2001 310 Sundancer with 2011 5.7 mpi Horizons. Just changed the coil unit and now instead of the usual one beep when I turn on the ignition I'm getting two. Does anyone know what this alarm is trying to tell me? Thanks