Recent content by nyminute

Different Drum, Linda (I ate Rhode Island) Ronstat

If I change my 330 to 350 My storage guy will clip me for more cash. What I need is a LED Display to be a 350 at Sale time and a 310 when taking up real estate. Ever changing sizes for ever changing times!

That would depend on the mast height and depth of the water in the slip. A sure fire method would be to tell your neighbor that you are teaching your 7 year old to dock your vessel. He will move before sundown!:smt009

That is a fact. I have enough data now to warrant the wait. The sound of fibreglass grinding and cracking on steel isn't soothing. The admiral on the bow.............................Now that is worth a thought........................well maybe not. :thumbsup:

Yeah that ought to ring some bells! :grin:

I need to find my vessels height from the water line to the top of the arch. Where do I find an accurate size? It is a 98 Sundancer 330 with twin 7.4s IB. I do have a Raymarine radar which I would tack on to the known height. The admiral thinks??? THINKS we can fit the 11' clearance at South...

This is the driver for the radar. The unit I have now is: Thomson Airpax Mecharonics P/N S57L048S 7.5 Deg/Step 27.5 Ohms/Coil. Evidently Raytheon has these parts available for house repairs only. I will buy the entire dome radar in any condition to obtain a working stepper motor. Contact me by...

I sent the dome in last fall and it checked out good at Raymarine. I cleaned and reconnected the dome and it ran well every try in heated storage and after spring commissioning. Last week I fired it up and again "Antenna Not Rotating" comes on at the 47 seconds to go of a 70 second warm up. I...

Who if anyone makes or sells caps or covers used for covering a speaker cut out? My Arch has 4 caps that are off white and look ugly on the white. I'd like to replace them vs. painting.:huh:

Mine has met the end. Looking to replace it with same. email at kaji-13@hotmail.com Thanx.:huh:

No Genset.

That never even passed my mind Saturday. It sat in the truck doing absolutley nothing!:smt013

Must be early, I read the Marinco data and the bells started ringing. This plugs in to the recepticle and the my SP chord to it. Duh! BTW I ordered one from Wholesale Marine. Still making a pair of strap handles to lift that sucker if I ever fail while out. :thumbsup:

This will use a grounded extension from the out let or plug this into the outlet then use my standard shore power chord? I Have 2 Shore Power inputs. Do I need 2? Being Storage I only need to run the hatch and Charger through the winter. BTW thanx for the info. :smt038

Batteries are low and I can't open the Engine Room hatch. I have pulled the pin but I am concerned on how to lift the hatch door so I can grab it and lift. Pry bar comes to mind but I fear damage to the lip of the door even with a cushion. Any thoughts or prior successes? I will mount a strap or...