Oh Man! It's been way too long and I've done a bunch of great improvements on the boat I'd like to discuss!
Camper Canvas all around with a nifty windshield. Thick polycarbonate, like glass! $3800 bucks...Big shout out to Material Works in Page AZ for doing such great job! Highly Recommend-...
2000 310DA
I've been trying to do some research on running a cable from the arch into the cabin on the starboard side. I need to send it behind the electrical panel in the starboard cabin. I've removed the cushioned panel at the bottom of the arch to reveal the mounting bolts and wire loom...
WOW! I haven't updated this thread since April '21! I must have been boating! :p
Indeed we have been! Not a single maintenance problem all summer once I finished up things back in April. I've made some improvements I'll detail, but first, here's some highlights from the season...Kirk Out
I recently replaced my Promatic 30-3 with a Pronautic 1230 I picked up on E-bay. Half the price.
Easy direct swap-out. Be sure to disconnect charging leads from batteries by either removing the in-line fuses or removing from battery.
The mounting hole locations are different, so you'll have to...
Yeah! 4 feet of water left before the end of the ramp is exposed.
The park service has metal plates staged for deployment to cover the gravel for trailers...
That's a foam pad. It came with the Makita polisher. I have a pad for each product 1000/2500/polymer. I don't mix the wool pads with the different compounds. Some day I'll finally get to use the foam pad for the polymer. I'm still working away at the 1000 and 2500 phases. UGH! My lower back hurts!
super happy with the line of Smoove products. i'm having to do 3 steps due to heavy oxidation. i bet the OP need only do a 2 step with the 2500 then high gloss polymer. use a polishing pad cleaner! -kirk out
pro-cut 1000
pro-cut 2500
white cloud high gloss polymer
Super Happy with the Smoove line of products. I've had to do a 3 step process due to heavy oxidation. But I bet you can just do the Pro-Cut 2500 and High Gloss Polymer.
Pro-Cut 1000
Pro-Cut 2500
White Cloud High Gloss Polymer
For an example of rookie big boat trials and tribulations, check this thread out:
http://clubsearay.com/index.php?threads/sea-ray-sss-1993-63-ft.40951/
OH MAN, you maintain your boat like few do, and still this kind of sh!t happens.
I'm doomed, no matter how much work I put into it, obviously, she'll never perform like I want her to....kirk out
I found a youtube video:
Brutal, I have to cut-off the battery holder, solder two wires to a sensitive exploding battery then solder wires to circuit board. Or, completely remove the current battery holder and solder a new solderless battery holder to the board. Oh man! Or, pay $180+ for a...
I've decided to maintain instead of replace the ancient GPS on this 2000 310DA.
I'm a puddle water boater and rely more on my depth gauge than any other instrument on the boat. The GPS loses it's fix every time the power is turned off due to a dead battery in the antennae. You have to input a...