Recent content by flashverde

I am not a reseller. These inserts had to be custom ordered from the factory with long back pins to fit the Cantaluppi "David" fixtures. I had to order way more than I needed which is why I am selling them at this price. Imtra shows there is no LED insert for these fixtures but these fit in...

12 SMD LED insert(pic 1) with long back pins that fit the Cantalupi 3" recessed fixtures $8 ea. 10 SMD LED MR11(pic 2) insert that fits the Cantalupi reading light $8 ea. 6 SMD LED 42mm Festoon insert(pic 3) that fits the Perko cockpit light $6 ea. Equal or greater light output at 10% of the...

If you have the Cantalupi(model Sampli) round brass reading lights, the MR16 is too big. The MR11 just fits. Doctor LED seems fine but the $28 ea seems a bit pricey if I am reading it right. I live in Tacoma(Historic District) during the summer and would love to see your boat and have a...

12 SMD LED insert(pic 1) with long back pins that fit the Cantalupi recessed fixtures $8 ea. 10 SMD LED MR11(pic 2) insert that fits the Cantalupi reading light $8 ea. 6 SMD LED 42mm Festoon insert(pic 3) that fits the Perko cockpit light $6 ea. Equal or greater light output at 10% of the...

Custom designed 12 LED disk with back pins(picture 2) that fits directly into the reflector of the Cantalupi "David" recessed fixtures used by Sea Ray for many years. Brighter than 10watt halogen with 10% of the consumption. $9.50 ea. MR11(picture 1) 10 LED insert that fits directly into...

Jim, Thanks for your reply. I mounted the antenna flat on the radar arch with caulking. It's about 4' from the radar ant. and below the plane. Most of the time, the lost fix occures in rough seas(most of my running is in open water) and will usually get a fix in about 30 seconds if I come...

I put a C80 system on my 370 about 4 yrs ago. It came with the 120 gps antenna which was replaced by the 125 after several problems. That worked well for about a year and then began occassionaly losing the fix which has gotten worse over time. Over the last year, I have had a Raymarine dealer...

This is an old post but I don't get on here often. I too wanted a wood salon table for my '98 370da. At Seafarer Marine in Ft Lauderdale, I saw 2x4' 5/8 marine ply with cherry venier and laser cut inlaid compass rose. I think they were getting them from Wisconsin. I had the piece cut to...

I am dressing up my '98 370da by replacing some of the polished brass switch plates and push button cabiinet/drawer knobs. The switch plates were expensive but not hard to find(drsa.com). The knobs were difficult as customer service was not able to be of help. If others want these knobs, the...

I put these engines in my 370DA about 3yo with 600hrs on them now. I am mistified how someone can characterize these engines as shaking or rattling. Any tech I have talked to has said these are as quite and smooth as any 300hp engine on the market. My experience is the same as Peter's...

The stiping(both bootstripe and cabin trunk/arch) on my'98 370da is starting to show it's age. Too many years in the tropics I guess. Has anyone replaced theirs? How much of a job is it and what is the best source? Mine is gold and black. Thanks Mike

Bill, Two years ago, I repowered my 370DA with Yanmar 6lp's using Racor 900 filters and Diesel Tex magnets. I think they are the same technology as Algae-X. All I can tell you is that I just changed the Racors for the first time at 450hrs and the vacumn gauges were still not registering and...