boater2018's latest activity

  • boater2018
    boater2018 replied to the thread Knock Sensor.
    I can’t send a pic as I’m an hour away, but yes, it is the bell like brass sensor on the block. I tried to mess with the wire routing as...
  • boater2018
    boater2018 posted the thread Knock Sensor in Sport Boats.
    2000 210 Sundeck with 5.0 EFI. I took the boat for a test run Saturday evening and after getting on plane and running for a couple of...
  • boater2018
    boater2018 reacted to dmorris800's post in the thread Outdrive Maintenance with Like Like.
    What drive is it in specific?
  • boater2018
    boater2018 reacted to Lazy Daze's post in the thread Outdrive Maintenance with Like Like.
    I would say AT LEAST every 3 years... realistically, you could go longer... especially since you're in fresh water. There is absolutely...
  • boater2018
    boater2018 replied to the thread Outdrive Maintenance.
    Alpha 1, Gen 2 drive
  • boater2018
    My lower unit is due for service. Last year, I had the upper pulled, alignment checked, and everything greased up. How often do you need...
  • boater2018
    boater2018 replied to the thread Trailer Hub Grease.
    Mine are lithium complex and calcium sulfonate, so should be ok. I will probably still swap the grease out of my gun to the new marine...
  • boater2018
    boater2018 posted the thread Trailer Hub Grease in Sport Boats.
    I was doing some preventative maintenance on my fishing boat trailer and have had issues getting the right seal for it, I guess it’s...
  • boater2018
    boater2018 posted the thread Trailer Hub Grease in Sport Boats.
    I was doing some preventative maintenance on my fishing boat trailer and have had issues getting the right seal for it, I guess it’s...
  • boater2018
    boater2018 replied to the thread Pickup tube replacement.
    My fuel water separator is always clean when I change it. I do that every spring when I change the oil and oil filter. It is hot start...
  • boater2018
    Anyone replaced their pickup tube? I was wondering how likely it is for the fitting to break? I was considering changing mine in my 2000...
  • boater2018
    boater2018 replied to the thread Sea Ray 210BR Interior.
    Valuable insight here. I appreciate the response. After previous threads that I had, I feel like the engine is performing as it should...
  • boater2018
    boater2018 replied to the thread Sea Ray 210BR Interior.
    My brother owns the 210BR or that would be an idea. I would hate to take the original engine out of it also, but it would be a...
  • boater2018
    boater2018 reacted to BillK2632's post in the thread Bellows Replacement with Like Like.
    I would consider inspecting / adjusting / lubricating preventive maintenance - it's not always replacing parts.
  • boater2018
    boater2018 reacted to GypsmJim's post in the thread Bellows Replacement with Like Like.
    I consider myself a reasonably good mechanic. Today, utube videos are a big help as well. I do 95% of my boat maintenance. Some years...
Back
Top