Espos4
Well-Known Member
If your concerned about paint from the CF3 module, you may want to flush out the fuel rail while it's off the motor.
Look for any debris. Also you could use a rubber hose and container to run the pump and flush that assembly as well.
If this is a CF3 paint issue, I suspect that the new injectors will help for a short time, but they too will eventually get clogged with debris.
Look for any debris. Also you could use a rubber hose and container to run the pump and flush that assembly as well.
If this is a CF3 paint issue, I suspect that the new injectors will help for a short time, but they too will eventually get clogged with debris.