420/44 DB Owners Club

Scott, yes we both have open array radar. I don't know my model, but I'm sure now days they have newer version, anyway. Call them up and tell them what equipment you have, and they'll tell you what you need.
 
Some folks are using a mount made by a guy in the mid west - goes by 'Nautical Creations. He will custom make whatever you want. I had mine made specifically for my sat dome and radar, and my mounting place holes were drilled to match the pattern for the radar that was on the arch. Didn't have to drill extra holes, or deal with sealing up old holes.

The mounts aren't as quite as modular as the seaview, but they are 20-30% cheaper than the seaview. Quality appears to be very well made and the powdercoating seems very good as well.

You can't go wrong with Seaview, but you are paying a premium for the name and modular design. And, it'll take extra work for you to install it.

Just something to consider.
 
Should have known to go to the forum first! Have spent all day on the internet looking for dimensions and clearances and couldn't find a darned thing. Am wanting to purchase an '05 420 but needed those clearances to determine if several fixed bridges could be cleared. Looks like I'm good to go. Thanks so much Alex!!!
 
This forum is an excellent resource for vital information. We have a lot of very knowledgeable captains who are willing to help.

Welcome to CSR.
 
How do you guys keep your ice tasting fresh? Previous owner let boat sit over winter without blowing lines and I'm still struggling to clean it up. I've been putting a cup of bleach in and flushing repeatedly. I can get the tap water tasting good but the ice has never been good. I've dumped the ice week after week and it still has a rancid foul smell. Any advice?
 
How do you guys keep your ice tasting fresh? Previous owner let boat sit over winter without blowing lines and I'm still struggling to clean it up. I've been putting a cup of bleach in and flushing repeatedly. I can get the tap water tasting good but the ice has never been good. I've dumped the ice week after week and it still has a rancid foul smell. Any advice?

As I'm sure you know, making ice is using very little water.....Which ice maker? If it's a cockpit ice maker, remove the supply hose and run the bleach water thru it (or the fresh water spring treatment)..let it sit for an hour, then flush and run the water for a long time. If it's the galley ice maker, obviously a lot bigger project. You probably need to remove the Refrig, make up a connection to run a hose to the sink or outside and do the same thing.
Something also to consider is to add a inline canister type filter if you don't have one. Alex (Inspiration) told me his 420 does not have one which was surprising to me. The 500/52 SB have it......
Maybe someone with the same boat will chime in with an easier/better way.....
 
Last edited:
I'm going to bet it's the innards of the ice maker, not the pex line running water. Bleach is a good disinfectant, but isn't going to clean the ice maker as well. You may have to pull the ice maker, disassemble, clean, and re-assemble.
 
I use a Culligan IC-EZ-4 IC-EZ-4 EZ-Change Icemaker & Refrigerator Drinking Water Filter works very well. I use alot of ice. From amazon for about $45?
 
Last edited:
I’ve searched CSR but didn’t find an official 420DB thread. So, I figure it’s a good idea to have one. Let me open it with a quick story on my upgrade process from our lovely 320DA “Boat A Bing”.

It’s been about six months since we began our search for a new boat. We loved the line and had 420DB on our radar for a long time. Short after we made the decision to upgrade to a bridge boat I was advised to explore an option and consider a 400DB model.
After looking closely we could see a huge difference in price and the fact that real estate wise it’s almost the same boats was very good incentive.

The first immediate thing was to see a 400DB in person to make sure this is something that can work for us. So, we found one in Staten Island and went to check it out. The price was way above reasonable and the boat was a trash, but we only wanted to see the boat layout and we needed to get an answer to one question “is this model something that we really like and can own for years to come?”. The answer was “Yes, but only 2000 and newer and for the right price”. The big part of the deal was trading our 320. So, I contacted every selling agent for the boats that got on my “purchase prospects” list and quickly have learned that pretty much none of the 400 deals would accept my 320 for a reasonable price as a trade. This is where we had to make a decision on our further approach. After looking for some time, while I’ve listed my 320 on the market, it was becoming clear that if we’re hunting for 400DB deals, we’ll have to deal with the fact that in order not to give our exceptionally maintained 320 away we’ll have to just buy 400DB and sell 320 on our own. It took us about two months before we were able to get closer to something what we were looking for, in regards to 400DB deals. We found what was presented as the nicest and cleanest 2002 on the market. So, we made the commitment to proceed with this eventful process. Here’s the link with all the details regarding the deal 400DB Upgrade Went South – Buyers Be Aware

So, despite a huge disappointment after spending about 2 months and ~$5K with not much result the search had continued. During all this time I was periodically recompiling a list of 420DBs and was contacting the sellers regarding my trade. Anytime we thought of 420DB the situation was clear, we can only swing it if they accept our trade for a reasonable cost (not the “below wholesale” price what every broker offers).

As the time goes by, the season in Northeast was over. Our 320 was prepared for the winter and this was the time when number of sellers (400s and 420s) came to realization that they have to make considerable price adjustments if they want to sell their boats. So, I’d say that closer to December I started getting calls from the sellers in regards to new deals. This is when we finally heard a reasonable offer to take our 320 in trade on the sale a beautiful 420DB.

The moment we saw the boat we knew right away that this was our dream 420 and we’re buying it as long as all checks out and the numbers work for us. Well, as with anything that comes to boating it takes a long time to get things moving. But, after a while of hard work of negotiations and getting over the details, the contract was made and we proceeded with the purchase process.

The tricky part was getting her surveyed as the weather was only getting colder. We were trying to pick the warmer days, but at that time we were just happy that it wasn’t snowing or there was no freezing rain in the forecast. So, the survey was done during below freezing temps with 20kts wind making it a very “interesting” event. When we pulled to the dock after a sea trial there was ice all over the boat. I never thought I’ll be boating in these conditions, but as people say “there’s a first time for everything”. After all reports (hull survey, mechanical survey and oil analyses) came back, I had very good idea where I stand and we moved on to the final stage of the purchase process.

Here’re few things about the boat. First of all I’d like to mention that I’m a big fan of keeping things simple and have minimum overhead. Thus, this was the primary driver for major items like hull color and engines choice. I spend a lot of time working on the boat and adding extra care for colored hulls (despite the fact that they look great) was not on my wish list. As for the engines, I did my homework, posted some threads and have learned few things about the new to me diesels. I listened to FWebster’s suggestion, as agreed with the approach (lose few HPs and couple of KTS in exchange for reliability and engine base simplicity), and picked the boat with basic Cummins 6CTAs . I have to admit that I enjoyed all the detailed data SmartCraft provided on my 320, but I hate when the censers are giving troubles. Luckily, my 320 wasn’t a trouble boat at all, but just reading som many stories didn’t comfort me. I also agreed with Frank’s point that if you know basic stats on fuel burn, there’s no really a need for fancy SC system to streamline this info instantly, as everything has a price. Therefore, fully mechanically controlled engines were my choice. After testing few 400DBs with Cummins 6CTAs and then seeing performance of my new 420DB I was satisfied. To my surprise there was no difference in performance despite the fact that my 420DB is 8,000 heavier than 400DB. But, as Frank said, that’s an art of engineering.

Here’re few pictures that was able to capture:

102_0296_CSR.jpg


102_0292.jpg


102_0243.jpg


102_0293.jpg


102_0262.jpg


102_0268.jpg


102_0270.jpg


102_0281.jpg


102_0273.jpg


102_0208.jpg


102_0283.jpg


So, my 420DB fellow owners, let's keep this thread going and share our stories, maintenance tips and trick, and of course enhancement project ideas.

Cheers,
Alex

Great story thanks for sharing...you new boat looks amazing....just curious, did it come with the sunpad on the bow? I am looking for that exact one for my 2006 44 Sea Ray Sedan Bridge but haven't been lucky to this point. Jeff
 
Great story thanks for sharing...you new boat looks amazing....just curious, did it come with the sunpad on the bow? I am looking for that exact one for my 2006 44 Sea Ray Sedan Bridge but haven't been lucky to this point. Jeff

Jeff,

Yes, my boat came with custom sun pad.
 
Hey Alex -- that teak decking you have - do you know which kind it is? nuteak, plas-deck, etc? Do you know who might have a pattern? Do you have any heat issues?
 
I’ve searched CSR but didn’t find an official 420DB thread. So, I figure it’s a good idea to have one. Let me open it with a quick story on my upgrade process from our lovely 320DA “Boat A Bing”.

It’s been about six months since we began our search for a new boat. We loved the line and had 420DB on our radar for a long time. Short after we made the decision to upgrade to a bridge boat I was advised to explore an option and consider a 400DB model.
After looking closely we could see a huge difference in price and the fact that real estate wise it’s almost the same boats was very good incentive.

The first immediate thing was to see a 400DB in person to make sure this is something that can work for us. So, we found one in Staten Island and went to check it out. The price was way above reasonable and the boat was a trash, but we only wanted to see the boat layout and we needed to get an answer to one question “is this model something that we really like and can own for years to come?”. The answer was “Yes, but only 2000 and newer and for the right price”. The big part of the deal was trading our 320. So, I contacted every selling agent for the boats that got on my “purchase prospects” list and quickly have learned that pretty much none of the 400 deals would accept my 320 for a reasonable price as a trade. This is where we had to make a decision on our further approach. After looking for some time, while I’ve listed my 320 on the market, it was becoming clear that if we’re hunting for 400DB deals, we’ll have to deal with the fact that in order not to give our exceptionally maintained 320 away we’ll have to just buy 400DB and sell 320 on our own. It took us about two months before we were able to get closer to something what we were looking for, in regards to 400DB deals. We found what was presented as the nicest and cleanest 2002 on the market. So, we made the commitment to proceed with this eventful process. Here’s the link with all the details regarding the deal 400DB Upgrade Went South – Buyers Be Aware

So, despite a huge disappointment after spending about 2 months and ~$5K with not much result the search had continued. During all this time I was periodically recompiling a list of 420DBs and was contacting the sellers regarding my trade. Anytime we thought of 420DB the situation was clear, we can only swing it if they accept our trade for a reasonable cost (not the “below wholesale” price what every broker offers).

As the time goes by, the season in Northeast was over. Our 320 was prepared for the winter and this was the time when number of sellers (400s and 420s) came to realization that they have to make considerable price adjustments if they want to sell their boats. So, I’d say that closer to December I started getting calls from the sellers in regards to new deals. This is when we finally heard a reasonable offer to take our 320 in trade on the sale a beautiful 420DB.

The moment we saw the boat we knew right away that this was our dream 420 and we’re buying it as long as all checks out and the numbers work for us. Well, as with anything that comes to boating it takes a long time to get things moving. But, after a while of hard work of negotiations and getting over the details, the contract was made and we proceeded with the purchase process.

The tricky part was getting her surveyed as the weather was only getting colder. We were trying to pick the warmer days, but at that time we were just happy that it wasn’t snowing or there was no freezing rain in the forecast. So, the survey was done during below freezing temps with 20kts wind making it a very “interesting” event. When we pulled to the dock after a sea trial there was ice all over the boat. I never thought I’ll be boating in these conditions, but as people say “there’s a first time for everything”. After all reports (hull survey, mechanical survey and oil analyses) came back, I had very good idea where I stand and we moved on to the final stage of the purchase process.

Here’re few things about the boat. First of all I’d like to mention that I’m a big fan of keeping things simple and have minimum overhead. Thus, this was the primary driver for major items like hull color and engines choice. I spend a lot of time working on the boat and adding extra care for colored hulls (despite the fact that they look great) was not on my wish list. As for the engines, I did my homework, posted some threads and have learned few things about the new to me diesels. I listened to FWebster’s suggestion, as agreed with the approach (lose few HPs and couple of KTS in exchange for reliability and engine base simplicity), and picked the boat with basic Cummins 6CTAs . I have to admit that I enjoyed all the detailed data SmartCraft provided on my 320, but I hate when the censers are giving troubles. Luckily, my 320 wasn’t a trouble boat at all, but just reading som many stories didn’t comfort me. I also agreed with Frank’s point that if you know basic stats on fuel burn, there’s no really a need for fancy SC system to streamline this info instantly, as everything has a price. Therefore, fully mechanically controlled engines were my choice. After testing few 400DBs with Cummins 6CTAs and then seeing performance of my new 420DB I was satisfied. To my surprise there was no difference in performance despite the fact that my 420DB is 8,000 heavier than 400DB. But, as Frank said, that’s an art of engineering.

Here’re few pictures that was able to capture:

102_0296_CSR.jpg


102_0292.jpg


102_0243.jpg


102_0293.jpg


102_0262.jpg


102_0268.jpg


102_0270.jpg


102_0281.jpg


102_0273.jpg


102_0208.jpg


102_0283.jpg


So, my 420DB fellow owners, let's keep this thread going and share our stories, maintenance tips and trick, and of course enhancement project ideas.

Cheers,
Alex
I am looking for a sun pad just like the one in your photo - I have a 2006 44 Sedan Bridge....any ideas?
 
Hey Alex -- that teak decking you have - do you know which kind it is? nuteak, plas-deck, etc? Do you know who might have a pattern? Do you have any heat issues?

I was told it's PlasDECK. You can contact Traves at "Info@ttcustommarine.com" He told me he has the pattern for 400DB, which might work.

Heat - yes, with darker color like mine, the floor does get hot on the hot days. However, we don't consider it as an issue. Out of all the areas we have covered, only the swim platform gets hot, as everything else is mostly in the shade. To get rid of the heat on the swim platform we spray a bit of water, or put a towel or floating mat. But, I'd say that one or two towels is what we use the most, when we hangout on platform for a while.
 
I am looking for a sun pad just like the one in your photo - I have a 2006 44 Sedan Bridge....any ideas?

I'm not sure how I can help, other than providing dimensions or more pics. Mine was custom made by local shop in CT. It came with the boat, so I didn't design it. I'd suggest to find reputable local canvas shop and see what they can do.
 
Does anyone have some sort of "plugs/lids" in the lower corners of the ER hatch shown in red of the pic?

image.jpg
 
Alex, I think these are the drains for that lid. I believe they tie into a thru-hull and head overboard.

Yes, there are two drains. What I was asking is if anyone has lids to cover the drain holes. The lids should be attached on the ER hatch. I wanted to see what they look like, as mine were never there.


I was puzzled for a while why do I get sea water on my tool box, I found an answer while doing some checking during a cruise. When seas hit the hull the water rushes through those drain holes right in to the ER. Obviously it's all in controlled fashion when ER hatch is closed, but when it's open, you're looking at two fountains.


After discovering this, I realized that I'm missing two small lids from the ER hatch. So, I'm trying to find the replacement.
 
My drains connect to a drain line that goes to a thru hull

Yep, same on mine. I'm sure thay all do. The issue I'm describing is sea water making it's way via thru-hull, up the drain hose, up into the drain and spilling over in the ER. This will take place in rough seas, if your ER hatch is also missing those lids.
 

Forum statistics

Threads
113,186
Messages
1,428,173
Members
61,097
Latest member
Mdeluca407
Back
Top