- Nov 4, 2019
- 2,480
- Boat Info
- 2010 Sundancer 500
2015 Brig Falcon 330T
- Engines
- Twin Cummins QSC550 w Zeus Pods
Asking for a friend, he has a new to him 2019 350 Sundancer 6.2 w Bravo 3s.
Took it out yesterday and about 15 min the port engine threw an overheat error code. He was able to limp back to his slip, with limited rpm on that motor (2400 rpm). He said the port motor was 175 and the stbd was below 170.
I'm going down tonight to help take a look but i asked him if he checked his strainers and he said his boat does not have strainers, that there are "holes in his drive that act as strainers".
I admit I am new to these drives, systems and am looking for any guidance at all.
I will be swapping sensors from one engine to the other to see if it follows the sensor.
Any and all help appreciated!
Took it out yesterday and about 15 min the port engine threw an overheat error code. He was able to limp back to his slip, with limited rpm on that motor (2400 rpm). He said the port motor was 175 and the stbd was below 170.
I'm going down tonight to help take a look but i asked him if he checked his strainers and he said his boat does not have strainers, that there are "holes in his drive that act as strainers".
I admit I am new to these drives, systems and am looking for any guidance at all.
I will be swapping sensors from one engine to the other to see if it follows the sensor.
Any and all help appreciated!