KEVIN D TOBIN
Member
- Jun 12, 2018
- 69
- Boat Info
- 1993 290 sundancer, 7.4L mercruiser repower 2018
- Engines
- 7.4L Bravo ll drive
I would like to put a strainer in between the raw water pump and the oil cooler so that if the impeller breaks apart it will wind up in the strainer not the oil cooler, but the problem is no strainers with 1.25" in and out even comes close to 30 gpm. So now I know why I never see one in any of the cooling drawings. I know one way to increase the gpm on a plastic strainer is to cut the inlet feed tube to about an inch above the bottom,any thoughts ???