mnm99
Well-Known Member
For all you Audio experts please chime in. Over the winter I'm setting up my system and may need some pointers. To start off I currently have the stock Clarion head unit and stock amps. So far I changed the speakers to 6.5 JL's and (1) 10" sub. The sub is powered by a JL (JX250/1D) amp. Yes I know it's not Marine and I'm changing it out anyway. I just bought a JL MX500/4 for the 4 6.5's and am looking at the JL MX300/1 for the sub. I plan on adding at least 2 , 7.7's speakers somewhere, but not sure yet with another MX500/4. SO...This brings me to my first question.
The MX300 has a fuse rating at 30 Amps
The MX500 has a fuse rating at 50 Amps, I plan on installing 2.
Currently the stock amps and sub amp are tied into the fuse panel lug. My plan was to run a 2 gauge wire to the battery with a 130A fuse next to them and install a distribution block where my amps will be also each fused with the correct amp rating. Sound right so far?
The MX300 has a fuse rating at 30 Amps
The MX500 has a fuse rating at 50 Amps, I plan on installing 2.
Currently the stock amps and sub amp are tied into the fuse panel lug. My plan was to run a 2 gauge wire to the battery with a 130A fuse next to them and install a distribution block where my amps will be also each fused with the correct amp rating. Sound right so far?
Last edited: