TOpknot, makes all my lines... they will do Searay Logos for free on them as well..
all my lines are black, and float.
On the boat:
I have a 100 foot line with bag and stainless steal snap hook with an anti-chafe guard to tie the stern to banks, trees, and such this makes tying and untying a SNAP ha. vs knots and crap. go around the tree/stump/stake and clip it to its self. done. a pic of what the end looks like but wrong color and I have searay logos.
2- 25 foot bow lines with loop and logo on one end.
4-15 foot lines with loop and logo on one end.
6 fender lines (6 foot or rope, with tiny loop and logo) attached to nice fenders with fender covers
2-3 old dock lines as spares.
at the dock:
I have 4 normal dock lines with logos for the bow and mid lines. Measured to give nothing to roll up on the dock very clean look
At the stern I have custom shorty made with the same Stainless steel snap hook above and logos, and again nothing left on the dock the rope ends on the cleat. The stainless Snap hook attache to the rear stainless U bolts in the hull that are close to the water line. Again very clean look, and keeps ropes off the fiberglass, and you can step off the platform sideways with out going over a dock line.
http://mooringlines.com/