I'm interested in knowing how many 360 DA owners are on CSR, in case I want to direct questions your way using PMs. I am aware of Two Peas, PMvdb395DA (Peter), My3Sons and BOZ. Any others? Is there enough of us for an "official 360 thread"?
Calling all 360 DA owners
3 reading
La Maddalena
501 - 520 of 1,894 Posts
Joined
·
866 Posts
- Location
- Milford Ct
Well I can tell you one thing, when it finds something wrong you WILL know it lol. I had it go off one time and I was like dam! That thing is loud. I think my issue was generator related. But it was nothing serious
Joined
·
77 Posts
- Location
- Middle River, Md
Is there any documentation on what the system monitor interfaces with (as opposed to the system view monitor)? I am having a intermittent constant alarm - even with engines off and ignitions, etc off. Trying to troubleshoot through it.
Joined
·
1,870 Posts
- Location
- Table Rock Lake(Branson MO)
Could it be a high water alarm from a bilge pump?
Joined
·
77 Posts
- Location
- Middle River, Md
Have checked all the pumps - nothing on. No codes being sent from engine. Think it's either the DDU on dash or the buzzer itself. Need to keep troubleshooting.
Joined
·
810 Posts
- Location
- Thousand Islands, Ontario, Canada
Hello everyone, my nose tells me its time to replace the Holding tank vent filter. Two sizes are available: can anyone confirm its the 5/8ths hose size for the o2 360 ?
Thanks in advance .. Pete
Thanks in advance .. Pete
Joined
·
618 Posts
- Location
- Savannah, GA.
I'm having fresh water pump issues. It will start with a strong flow, then slow to a trickle. Any idea where the pump is located?
Joined
·
1,870 Posts
- Location
- Table Rock Lake(Branson MO)
On my 03, its under the master berth.
Joined
·
866 Posts
- Location
- Milford Ct
Joined
·
4 Posts
- Location
- Annapolis, MD
Did you find davits and install? Curious, as I am looking myself.
Joined
·
618 Posts
- Location
- Savannah, GA.
Turns out, the screen needed to be cleaned. Works great now.
Joined
·
866 Posts
- Location
- Milford Ct
Yeah I'll be in for davits over the winter too. Ah winter research projects.
Joined
·
10 Posts
- Location
- Puerto Rico
Hey guys, we did it.....finally moved forward on the 2002 360 with twin yanmars and a westerbeke generator. It was a process but we were able to take her out this weekend to Palomino Island (small island off the east coast of Puerto Rico).
A question for this group though - and I've not found too much info on line - but has anyone worked with their sliding door and the trucks /'rails? The truck on the bottom rail has completely come off and I'm not real sure how it fastens to the door. The upper trucks are obvious.
Many thanks and glad to be a part of the 360 family!
A question for this group though - and I've not found too much info on line - but has anyone worked with their sliding door and the trucks /'rails? The truck on the bottom rail has completely come off and I'm not real sure how it fastens to the door. The upper trucks are obvious.
Many thanks and glad to be a part of the 360 family!
Joined
·
866 Posts
- Location
- Milford Ct
CONGRATS J!! That's fantastic! Welcome to the family. I cant wait to hear how she does with the Yanmars. I dont have any history with the door at all but I'm sure someone does. they are the same in a few models of Dancers
Joined
·
810 Posts
- Location
- Thousand Islands, Ontario, Canada
Quick question..what exactly does the "Searay systems monitor" monitor on the 2002 model??
Found out the other day...pressed the start/stop rocker and no lo oil press buzzer...looked at sys monitor display.. there was a message about datalink fault... turned ignition power/batts off and reset ...systems returned to normal and low oil press warning returned on initial start. So I suspect it applies to eng temp as well.
Found out the other day...pressed the start/stop rocker and no lo oil press buzzer...looked at sys monitor display.. there was a message about datalink fault... turned ignition power/batts off and reset ...systems returned to normal and low oil press warning returned on initial start. So I suspect it applies to eng temp as well.
Joined
·
298 Posts
- Location
- CAPE CORAL, FL.
Congrats and welcome to the club!
I'm sure you will enjoy your new purchase as we have. 4 1/2 years and closing in on some 1000 engine hours, we know we made right choice. "SHELL SEAKERS" was very comfortable when we did the GREAT LOOP last year. 7 months of a once in a life time SUPER trip!
2 years ago, I replaced the upper track and truck wheels with a plastic product from "GRAINGER". The bottom track & wheels seem to be ok. So other than cleaning, I have not messed with the bottom. I think there is slot on the bottom of the door that the wheels fit into and then cross bolted. When I did this repair, I removed the exterior door shield & door. (Think of a pocket door in a home.) Really not that bad!
This group will lead you to all of answers as needed. A great network!
Regards,
D
Joined
·
919 Posts
- Location
- San Diego, CA
congrats! The 360 is a great boat. You will love it. You are the only person With a 360 I know with diesels. I would be curious to hear your fuel burn rates.
Joined
·
10 Posts
- Location
- Puerto Rico
For sure, I'll provide some numbers. We've got a couple of bigger trips in mind - over to St Thomas, Tortola, Virgin Gorda, etc. I've got a few projects in line before we go that far but we've already made a few day trips out to some of the small islands around PR.
We're excited to have a boat here, the waters around PR and the islands are fantastic.
Thanks,
john
Joined
·
10 Posts
- Location
- Puerto Rico
Gents,
Does anyone know how to access (read what do I need to take apart) to get to the stbd fuel sending unit?
Thanks,
john
Does anyone know how to access (read what do I need to take apart) to get to the stbd fuel sending unit?
Thanks,
john
Joined
·
1,258 Posts
- Location
- Boston Harbor/Falmouth Ma
I going to subscribe to this now because I hope to have a 360 one day soon when the wife says,
"that's it, we are done having kids".
We have an agreement, done having kids...bigger boat. For us I believe the 360 would be the best balance although I wish more were available with diesel engines for efficiency. Long cruises will be quite costly.
"that's it, we are done having kids".
We have an agreement, done having kids...bigger boat. For us I believe the 360 would be the best balance although I wish more were available with diesel engines for efficiency. Long cruises will be quite costly.
Joined
·
866 Posts
- Location
- Milford Ct
501 - 520 of 1,894 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
