New here, does anyone know where I can find the Helm Bench seat and the Transom bench seat for an '86 300da?
Thanks,
John
Thanks,
John
86 Sundancer 300da Bench Seats
- Tags
- 300 bench seats
JHallahan
1 - 8 of 8 Posts
Joined
·
660 Posts
- Location
- new england coast
You cannot buy any of this seating. You will have to tear yours apart and rebuild them from scratch if they are that bad.
Joined
·
27 Posts
- Location
- Nashville, TN
When I had this boat I used captains chairs instead of the back bench. Much more comfortable. I had to get a place that did marine vinyl to rebuild the helm seat.
Joined
·
227 Posts
- Location
- Jersey Shore
I am just fininshing rebuilding my entire helm seat.. needed to take every piece apart, trace it out cut it with a jig saw, sand down to fit and it still was tough to line all up. After getting all the pieces the correct size I had a counter top guy formica both sides. I tell you this was not an easy job, nor cheap. I did it exactly how the factory did, buying an air stapler to fasten it all together. They matched my color to the tee so mine looks great. I used exterior plywood and fiberglass resined the edges. I would say this would be a $1500 job if you don't do it yourself. Good luck take lots of pics for reference.
Joined
·
660 Posts
- Location
- new england coast
I built the platform. The stock platform is way too small.
1 - 8 of 8 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
