ZF63 transmission fluid??

Discussion in 'General Discussion' started by mnm99, Aug 8, 2016.

  1. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
    I want to change out the fluid in my transmission. I read in a few places Red Line is a good fluid. Can I use this kind? The thicker viscosity may quiet them down.

    http://www.redlineoil.com/product.aspx?pid=54&pcid=9



    • For heavily-loaded vehicles, allowing operation at up to 70°F higher while maintain thicker viscosity than traditional ATFs
    • Use where Dexron III®, Dexron II®, Mercon®, or GL-4 gear oil are recommended
    • Dramatically less evaporation, less varnish of valves and clutches in extreme conditions
    • Red Line offers the widest selection of fully-synthetic ATF on the market today
    • Each offer improved thermal stability, maintain viscosity levels, and feature lower volatility while providing the required frictional characteristics of each fluid's OEM-style replacement
    • Reduced oxidation and lower volatility at high temperature
    • Allows high-temp operation without varnishing valves and clutches
    • Extended drain intervals
     
  2. fwebster

    fwebster Well-Known Member TECHNICAL Contributor PLATINUM Sponsor

    Oct 6, 2006
    Middle Tennessee ; Panama City Beach, FL
    1996 450DA
    3116 Caterpillars
  3. mnm99

    mnm99 Active Member SILVER Sponsor

    Oct 2, 2015
    Long Island
    2004 340 SeaRay Sundancer
    Twin 8.1 Merc
    Thanks. I guess any from the list, Lubricant class 04D

    Looks like Amsoil is one of the choices [h=1]Torque-Drive® Synthetic Automatic Transmission Fluid[/h]
     
    Last edited: Aug 8, 2016
  4. juggernaut1

    juggernaut1 Active Member PLATINUM Sponsor

    683
    Apr 19, 2015
    Perth, Western Australia
    2006 38 Sundancer
    8.1S / ZF 63V Drives

Share This Page

Show Sidebar