Windshield washer

Discussion in 'Announcements & FAQs' started by jmpoulin, Aug 9, 2016.

  1. jmpoulin

    jmpoulin New Member

    1
    Aug 9, 2016
    Mississauga Ontario Canada
    2008 Sundancer 380
    454 mercruiser
    I have a 2008 Sundance 380
    We are having problem with windshield washer the water keep flowing to the wipers and will not shut off.
    Does anyone know where the water pump is located for the washers.
    We cannot keep our fresh water tanks full as the washer drain out all the water over time

    Help!! any ideas how we can change this pump or where it is located

    Mike
     
  2. gerryb

    gerryb Well-Known Member TECHNICAL Contributor

    Oct 12, 2006
    Somers Point, NJ
    "On Vacation"
    2006 40 Sundancer
    Raymarine E125 & HD Radar + Garmin 5208
    QSB5.9 380 Cummins
    There is a 12v pump located behind the icemaker in the cockpit (at least that's the set-up on our 40DA).
     
  3. katricol

    katricol Active Member SILVER Sponsor

    Mar 4, 2008
    LONG ISLAND SOUND
    2000 540DA
    CAT 3196 660 HP
    If it's not there, turn everything else off and listen for it
     
  4. 420

    420 Member

    40
    Aug 11, 2015
    Lake Erie
    2003 420DA
    Cummins 6CTA's
    I had the same issue on a 420. It's actually a solenoid tee'd from the cockpit sink. I simply removed it and plugged the T connection. Solenoid gets corrosion and is stuck open - allowing water to flow. My next move is to clean the solenoid out with some CLR and reinstal. Buying a new one is crazy $$$... We're fresh water boaters, so a windshield wash is not necessary.
     

Share This Page

Show Sidebar