Window trim

[ericcarr2000]

I’m in need of replacing my window trim pieces on my 1990 sea ray sundancer. How do I go about taking the windows out?

 

[Fahrphrompuken]

I am getting ready to rebuild my windows too.
Here is a link to the components you'll need. These will also work for the aft cabin window as well.

https://www.taylormadeproducts.com/hardware/sliding-side-window-parts/

 

[ericcarr2000]

Yeah I already ordered the parts, I just need to know how to get the windows out.

 

[duckhead69]

On outside of the window remove the rubber seal outer portion . That will expose screws that hold window into the boat.Then I also replaced all seals that hold glass in On my 89 had 3 different seals look up flocking replacement if further help is needed

 

[ericcarr2000]

On outside of the window remove the rubber seal outer portion . That will expose screws that hold window into the boat.Then I also replaced all seals that hold glass in On my 89 had 3 different seals look up flocking replacement if further help is needed

Ok, after I take the screw cover off on the outside, and then remove them screws, should I be able to remove the outside of it? The reason I’m asking is because I just got done redoing the entire of the cabin so I really don’t want to remove anything I don’t have to from the inside.

 

[duckhead69]

Yes screws hold the frame in get putty knife or razor knife to cut silicone free push from inside boat out or pry up on it. Then the whole frame comes out with all plexy glass in it. then you can pull outer gasket/ seal out and all glass comes out.

 

[ericcarr2000]

Ok cool.. thank you, I’ll give it a try as soon as tge weather breaks.