What does everyone do for a living?

Discussion in 'General Discussion' started by 04cobra23, Jan 27, 2016.

  1. nickdcj7

    nickdcj7 Member

    233
    Jan 5, 2014
    Bass River, NJ
    1986 390 EC
    Twin 454 Mercruisers
    manufacturing or facilities maintenance? just curious as i do some work in your area for wastewater facilities.

    My company is an Industrial electrical contractor, systems integrator, and UL listed control panel manufacturer. I design, program, and start up the control systems we build and install, as well as provide tech service for PLC control systems, both our own and systems from other manufacturers.
     
    Last edited: May 6, 2016
  2. Tonka Boater

    Tonka Boater Active Member GOLD Sponsor

    Jun 11, 2008
    Wayzata, MN
    1997 232 BR
    502 MAG, Bravo I
    I will PM you so the thread doesn't get derailed.
     
  3. Saverio

    Saverio Member SILVER Sponsor

    914
    Aug 31, 2010
    Long island new york
    1995 330 DA
    Twin 454 Webber Carbs
    V drives
    Fresh water cooled
    Nick

    I worked with PLC awhile back in manufacturing, worked at Estee Lauder back in the 90's Now I do facility maintenance I have 6 commercial buildings that I manage.

    Saverio
     
  4. DaleM

    DaleM Member

    614
    Aug 5, 2009
    Mt Airy, MD
    340 Sundancer
    Twin 8.1 Horizons
    I chase cyber bad guys.
     
  5. tgreene

    tgreene New Member

    96
    Sep 28, 2012
    Bay City
    1990 Sea Ray 260 CC
    7.4 Merc w/Bravo I Drive
    Operator(substation)/Electrical Maintenance Journeyman for a company that own this transmission grid for Michigan. 120,000volts, 138,000 volts and 345,000 volts. I've been doing this for 9 years.
     
  6. Kendall

    Kendall Member

    365
    Feb 3, 2009
    Lake Wylie SC/SC Coast
    2006 260DA
    "WET BAR"
    Generator

    Tow Vehicle:
    2006 F-350 Dually 4X4 Diesel
    350 MAG w/Bravo III
    Mechanical Engineer by degree. Engineering manager/designer over motorcycles and small engines for large bearing company. For 23 years now I have been designing bearing systems for motorcycles, ATV's, snowmobiles, marine (yes boats...including our favorite brand), and lawn equipment. Wanted to be a pilot but got into motorcycles instead...
     
  7. Pyrojodge

    Pyrojodge Active Member TECHNICAL Contributor SILVER Sponsor

    May 1, 2011
    Lake Erie Ohio
    1989 Sea Ray 340 DA
    twin 454 Mercs
    Not INA???
     
  8. Fred

    Fred Member SILVER Sponsor

    220
    Oct 3, 2006
    Jersey Shore
    2005 390 Sundancer
    thruster, ST7001 autopilot, tracvision M3, Raymarine Dual E120, 7.3 Kw Kohler
    8.1sHO with V-Drives
    Retired Flavor Chemist.
    I worked with the largest beverage companies worldwide to help make their products irresistible.
     
    Last edited: May 6, 2016
  9. FourthSeaRay

    FourthSeaRay Member

    40
    Sep 4, 2009
    Fox Lake, IL
    1995 370 DA
    Twin 7.4L
    1st career - Project Manager for IT network installations. 15 years.

    2nd career - High School Algebra teacher. Finishing up year 12, 6.5 years to go.
     
  10. Dez

    Dez New Member

    28
    Sep 27, 2014
    Bradenton, Florida
    2008 240 Sundancer
    2013 Ram Hemi 4X4
    5.0 Mercruiser/Bravo III
    I'm a mechanical designer for a consulting engineering firm in Sarasota, Florida. Mainly healthcare/hospitals.
     
  11. Bt Doctur

    Bt Doctur Well-Known Member

    Aug 21, 2010
    New Jersey
    Ex SRV 240 Weekender twin
    in between
    Verizon Retired ,currently repair boats full time and sell parts
     
  12. My Girl

    My Girl New Member

    28
    Sep 12, 2015
    Bellmore, NY
    2007 270 Amberjack
    320 MPI Horizon Bravo 3
    Office furniture sales
     
  13. Jgren

    Jgren Member

    35
    Apr 27, 2016
    Plymouth
    2001 290 Amberjack
    Merc 5.7 EFI's
    Going on eight years babysitting convicted felons behind tall fences with razor wire separating us from society. Twelve more years to go and I'll be free of all that BS. Also spend a couple days a week working on a inshore lobster boat for the sake of my sanity.
     
  14. uaplumber23

    uaplumber23 New Member

    9
    May 13, 2016
    Illinois
    2003 SeaRay 200 Bowrider
    305
    Union Plumber/ Firefighter
     
  15. Kreole Kid

    Kreole Kid Active Member

    May 25, 2009
    New Orleans, Louisiana
    2004 340 Sundancer,
    2008 Yamaha VX1100 Jet Ski
    8.1 Horizons, V-Drives
    My wife and I own and operate a Home Medical Equipment business, DME (Durable Medical Equipment). We sell,

    rent, and repo :smt018 medical equipment.
     
  16. KC_Sundancer

    KC_Sundancer New Member

    Sep 8, 2009
    Munising, Michigan (Lake Superior) Pictured Rocks
    1985 270DA Sundancer,Simrad 4G Radar,Lowrance Gen2 GPS/Sonar/Structure Scan,F350 7.3l Diesel, tri-ax
    twin Mercruiser 185R's (v6's) w/SE106 drives, "High Five" stainless props, Mercury 280 RIB w/9.9 Mer
    Aerospace assembly and facility tool design for 25+ years at the same company, providing full service tooling solutions with a great group of people. The last 12 for me with a home office. Have done work for all the manufacturers from the smaller Cirrus and Piper aircraft to military fighters, commercial airliners and spacecraft. Really enjoy the creativity of 3D computer tool design with the occasional on-site work. Very thankful for a steady, enjoyable career that let me and the family enjoy our previous years of boat racing and our now more relaxed north woods (and waters) lifestyle.
     
  17. CV-23

    CV-23 New Member

    Jun 25, 2010
    Williamsport, PA
    1990 270 Sundancer, 2003 Ford Excursion 4x4 Limited
    454 merCruiser w/Bravo 1
    Kind of joined late into this thread.....currently running a 65ft/95 ton steel simulated paddlewheel riverboat. Twin Volvo diesel/sterndrives and a 25K diesel genny. Got my 100T USCG Master License last year and crewed for a year before that. A year being 6 months in central PA. I'm also a lighting and sound tech/manager for a 1600 seat auditorium at our High School. On the side I run my own TV Production Company and we televise college and high school sports......about 40 a year. We also run the gas dock at the Marina. Pretty busy and being a Captain will be a great retirement job! Only 4 years away from that! Here's my full service bar on the water! We run six days a week from 10am-10pm. https://www.facebook.com/hiawatha.paddlewheelriverboat/https://www.facebook.com/mike.strunk.54/photos_all
     
    Last edited: May 16, 2016
  18. Mqtdavid

    Mqtdavid New Member

    12
    May 8, 2016
    Lake superior
    Hand me down 01 225 Weekender
    Merc 5
    Started my work life after college in Chicago doing international food marketing. Left big city life to return to the Upper Peninsula of Michigan and sold drugs (Pharma). After 16 years they decided Obama care was going to bankrupt the industry they let me go. Decided to open my own brewery, now I run a brewery and rarely get to boat or brew.

    2001 Sea Ray 225 weekender
    1968 Boston Whaler Naucet (currently not working)
     
  19. estoltz

    estoltz Member SILVER Sponsor

    353
    Jan 7, 2015
    Northern Virginia, USA
    2006 340 Sundancer with Generator (FOR SALE)
    2005 260DA with Kohler Generator (SOLD)
    Dual Mercruiser 8.1 Horizons
    350 Mag MPI with BIII (free with the purchase of 2005 260DA)
    Does anyone know how to make the speedo default to gps instead of paddle? My paddle wheel is showing about 8 mph less than gps and it keeps flipping back and forth between the two on the system view.
     
  20. JimG

    JimG Active Member SILVER Sponsor

    Nov 4, 2008
    Southern WV
    2007 310 DA
    Kohler 5ECD
    Twin 350 Mags
    Raw Water Cooled
    V-Drives
    What a Hi-Jack! :smt021
     

Share This Page

Show Sidebar