Feet From Satisfied
New Member
First time posting so I hope I do this right...
My westerbeke cranks all day no fire.. I did all the basic tune up stuff, oil, filter, plugs, wires cap, rotor & impeller in the fall, ran It to winterize.... no problems. Now as you searay guys know, I used to get an alarm when you toggle the gen battery on, with the run rocker switch in the on position... Im not getting that alarm anymore.... from the start switches on the unit, I hear the solenoid and see the choke when you toggle the (pre heat) rocker and it will crank all day... So im assuming im not getting power to the circut board from the main panel.
Also noticed nothing on the Searay system monitor either.. I didnt have any time to check much, just looking to see if anyone else had this problem. Thanks in advance for any help...
Its on a 2001 380 Sun Dancer
My westerbeke cranks all day no fire.. I did all the basic tune up stuff, oil, filter, plugs, wires cap, rotor & impeller in the fall, ran It to winterize.... no problems. Now as you searay guys know, I used to get an alarm when you toggle the gen battery on, with the run rocker switch in the on position... Im not getting that alarm anymore.... from the start switches on the unit, I hear the solenoid and see the choke when you toggle the (pre heat) rocker and it will crank all day... So im assuming im not getting power to the circut board from the main panel.
Also noticed nothing on the Searay system monitor either.. I didnt have any time to check much, just looking to see if anyone else had this problem. Thanks in advance for any help...
Its on a 2001 380 Sun Dancer