Water Tank gauge board replacement?

[speakrdude]

I’m not sure. Havent had to do one yet.

 

[Chris-380]

I’m not sure. Havent had to do one yet.

Thank You Jim, I will look at the display next time i am at the boat, almost has to be the display, because the indicating lights in the bathroom are working

 

[ocgrant]

Jim both my waste tank and water tank only part of the guage is lighting up. Ideas? I am pretty handy with a soldering iron..

 

[2005-Sundancer300]

4 transistors on the led circuit board. Easy fix. Just fixed someone else's from the Forum. I can send you the transistors or send the board to me and I will fix. Either way, no charge. Pay it forward!
Jim

Hi Jim! I'm a new member, but a lifetime of Searay's! Anyway, I know it's been a while since this post, but if by chance you still have 4 of those transistors left; could you send them my way?? From everything I've read, they should do the trick! Thanks!

 

[speakrdude]

Yup! Send me your addy!

 

[2005-Sundancer300]

Yup! Send me your addy!

Hi Jim, Since I'm new to this forum; what's the best way to send you my address - just post it here? Thanks!

 

[speakrdude]

Or message me.

 

[2005-Sundancer300]

Or message me.

Not sure how to do the messaging thing without an email or phone number - so here's my info: Mike Pote
PO Box 4096 Grand Junction, CO 81502. Very much appreciated - next time we go out on our boat I'll install these little "jems" and let you know! Thank you!

 

[Cocktail Time]

Welcome 2005-Sundancer dude. Were you the person I was talking to on the sea ray facebook page? To send a message just click on the name in the post and there is an option to start a conversation. Hope you like club sea ray. The 300 forum has a wealth of knowledge.

 

[2005-Sundancer300]

Welcome 2005-Sundancer dude. Were you the person I was talking to on the sea ray facebook page? To send a message just click on the name in the post and there is an option to start a conversation. Hope you like club sea ray. The 300 forum has a wealth of knowledge.

No, I don't believe that was me. But thanks for the messaging tip! I saw that option but thought it was referring to a starting a "public conversation" - but apparently not...

 

[speakrdude]

Not sure how to do the messaging thing without an email or phone number - so here's my info: Mike Pote
PO Box 4096 Grand Junction, CO 81502. Very much appreciated - next time we go out on our boat I'll install these little "jems" and let you know! Thank you!

Got it! In the mail today!

 

[2005-Sundancer300]

Got it! In the mail today!

That's really awesome Jim - I'll keep an eye out for them and let you know the results! Thank you!

 

[speakrdude]

Jim both my waste tank and water tank only part of the guage is lighting up. Ideas? I am pretty handy with a soldering iron..

These are really basic. What part of the fresh water tank is showing?

 

[Harry Williams]

Its the 4 resistors on the led display. Send it to me and I’ll fix for you. FREE!

Hi Jim, I have 1999 54 and the fresh water tank gauge always read half and down. works on full an 3/4. I'm reading here that it's the transisitor? What can i do get that fixed? What is it exactly? i'm pretty handy or what will you charge?
Harry

 

[gerryb]

Having the same issue here. I hate to trouble you though. Can you let me know which transistor is needed and I'll take it from there and reply with the results. Great thread! Thank you sir.

 

[speakrdude]

Send me the board and I’ll fix it up for you. No charge!

 

[Harry Williams]

Send me the board and I’ll fix it up for you. No charge!

Seriousally? I'll get it taken off this weekend.
Where do i send it?

 

[speakrdude]

Having the same issue here. I hate to trouble you though. Can you let me know which transistor is needed and I'll take it from there and reply with the results. Great thread! Thank you sir.

2n 3906

 

[speakrdude]

Jim Crews
273 Pine Meadow dr
Farmington Ar
72730

 

[speakrdude]

All 4 transistors need to be replaced.