Don Donaldson
New Member
I can fill my water system but the switch keeps kicking off is there a fuse and if so where located do you have any further advice or Reason why it is kicking off not able to run water in sink laboratory or flush stools
Water system switch.
- Thread starter Don Donaldson
- Start date
Boater420
Well-Known Member
- Mar 11, 2015
- 1,259
- Boat Info
- '97 330 Sundancer
V-Drives
Westerbeke 4.5BCG
- Engines
- Twin Merc 454's
When you say "switch", is that referring to the breaker for the fresh water pump in the breaker panel? How is the water flow when it is running before kicking off the switch/breaker? Is the pump really noisy? Making any strange sounds?
There is no fuse that I am aware of for the pump itself, just the breaker in the panel. It's possible the pump is at the end of it's life and is drawing too many amps and then tripping the breaker. I'd go locate the pump in the engine compartment, disconnect the hose at the output side and see if it runs without tripping the breaker.
There is no fuse that I am aware of for the pump itself, just the breaker in the panel. It's possible the pump is at the end of it's life and is drawing too many amps and then tripping the breaker. I'd go locate the pump in the engine compartment, disconnect the hose at the output side and see if it runs without tripping the breaker.
