Waste tank sender

[Hawkeye205]

New to the forum but I do have a question : how to you remove the sending units from the waste tank ?

 

[JC3]

Hawkeye Welcome to the Forum. I see you boat is a 2010 450DA. Very, Very nice. Is your gauges for the tanks not working? JC

 

[Gary Hill]

Most of the senders that i have seen, including the ones on my current boat, are just pressed in. Give them a wiggle and pull up and see if they start coming out.

 

[AKBASSKING]

On my older SR it unscrewed from the top of the tank......

 

[Hawkeye205]

The gauge never registers anything and most of the problems I have experienced on other boats I have owned have always been the senders as they are in a tough environment.

 

[Hawkeye205]

The are almost flush with the surface of the tank -nothing to grab and wiggle-almost looks like it is just a ring of caulk around the top of the sender-actually is 3 sender units

 

[Lazy Daze]

Are the 3 probes mounted within a larger, white plastic apparatus? Does this apparatus have a notched "ring" that is direct contact with the tank? If so, grab ahold of the notched ring and unscrew. The whole thing will come out as one assembly. I can't say for sure, though, on your boat.