VesselView Mobile Install - No SmartCraft Ports Available?

[argus1]

I want to install a VesselView Mobile to a 2011 350 Sundancer. Under my helm on the starboard wall there is a SmartCraft Junction Box with 8-ports with no available open port. The SmartCraft Junction Box is very hard to see but I felt around all the ports are all wires coming out of every connector. Is there somewhere else another SmartCraft Junction Box that may have a open port available or can I daisy chain another junction box to the 8-port junction box? This is the SmartCraft Junction Box with 8-ports that is on my boat.

 

[yv1]

I don't think there is another junction box. You can double check looking at the wiring diagram of your boat( if you have it on your owners manual). You could buy a 4 ports box and link it to the network.
But you might have an available port. All open ports are caped. Take a good look at the junction box. Make sure they're wires coming out each port. If you see one with no wires just remove the cap and install the VV Mobile there.

 

[LG111]

Yv1 is correct. Add a 4 way box or remove a dust cap.

 

[AJSB]

I have an extra 4 way box and dust caps if you determine you need to add a box. You'll need to get a female-female connector 84-892453A01 to tie the boxes together.

http://clubsearay.com/index.php?threads/smartcraft-junction-box.87401/

PM if interested in box & caps.