vessel view4 trans oil pressure reading??

Discussion in 'Pod Drives' started by john z, Mar 22, 2021.

  1. john z

    john z New Member

    14
    Mar 6, 2021
    2015 sea ray 510 sundancer
    550 qsc cummings
    looking at a 2015 sundancer 510 with cummings 550s,zues drive
    on the engine survey the vessel view trans oil pressure reads
    port 375
    stbd 60
    however boat runs and shifts fine,anyone had a reading like this?
    is the problem most likely in the vessel view??
     
  2. LG111

    LG111 Active Member

    730
    Jan 4, 2015
    NW
    44 Sedan Bridge - 07
    Black Hull
    QSC500’s
    Swap the sensors on both tranys and see if the low pressure follows. If it does, just order a new pressure sensor. If, not change the oil. If not, run a pressure test.
    If not, then a new boat is in order. LOL. JUST KIDDING... probably just a bad sensor.
     

Share This Page

Show Sidebar