Trying to find Sea Ray Yachts emblem stickers

[TJB]

New to the club, have owned a few Sea Rays prior to now, but recently purchased a 1999 560 Sedan Bridge and want to replace the older emblems that stick out and are faded to the newer black and chrome 11-7/8" emblem sticker. Tried online, but h

ave come up empty. Any help would be appreciated! Thanks!

TJB

 

[Shaps]

try
https://www.ebay.com/str/searayman13

(i have no affiliation)

 

[Stee6043]

try
https://www.ebay.com/str/searayman13

(i have no affiliation)

+1. Break out the checkbook

 

[Pirate Lady]

I have dealt with him for emblems and such, reputable guy, sells good stuff. Once i got a steering wheel cap that just didnt fit right, returned no problem. He’s a good dude.

 

[Risingson]

I just purchased two of these from
https://www.ebay.com/str/searayman13
doesn’t have the word yachts on them.
Not cheap very high Quality. Will be installing them this week. Great guy to do business with.

 

[TJB]

Thanks everyone! That helps a lot!

TJB

 

[Riptide III]

There is a member here who makes illuminated emblems. They are really sweet!

 

[TJB]

How do I find out more about those?

 

[Riptide III]

They are multi color. If he doesn’t chime in here shortly I will say something to him.

 

[Stee6043]

View attachment 107959 View attachment 107960
They are multi color. If he doesn’t chime in here shortly I will say something to him.

I sure hope they come with some adhesive other than the blue masking tape. I mean I trust blue masking tape like I trust band aids but...

 

[Riptide III]

I sure hope they come with some adhesive other than the blue masking tape. I mean I trust blue masking tape like I trust band aids but...

I think he recommends hammer and nails.

 

[Risingson]

How do you get the old emblems off? Are they bolted into the arch or just struck on with adhesive?

 

[Riptide III]

Adhesive. You can run a piece of wire up behind it to cut it free.

 

[Risingson]

Emblem was not easy to get off. Had to use some Adhesive remover. Than wet sanded 1000 grit.

 

[techmitch]

Emblem was not easy to get off. Had to use some Adhesive remover. Than wet sanded 1000 grit. View attachment 107994View attachment 107995 View attachment 107996View attachment 107997

Looks great. Now polish and then wax those rails.

 

[TTG]

Added these recently and pleased with them. the one ones are tough to get off…..at least for mr

 

[Risingson]

Did you have to drill holes for the lighted ones? What switch did you use?

 

[TTG]

Did you have to drill holes for the lighted ones? What switch did you use?

Yes. Had to drill hole for power wire only and run to dash.

There was an empty spot on dash and I was able to get a factory rocker switch with the blue light in it to match the rest of the dash. Flounder Pounder had the exact switch—housing, actuator, and switch with the little blue indicator light. Matches my dash perfect. Seriously though—hardest part was removing the old emblems.

 

[410PORT]

Added these recently and pleased with them. the one ones are tough to get off…..at least for mr

Where did you find these?

 

[Saverio]

Yes. Had to drill hole for power wire only and run to dash. View attachment 108007View attachment 108007

There was an empty spot on dash and I was able to get a factory rocker switch with the blue light in it to match the rest of the dash. Flounder Pounder had the exact switch—housing, actuator, and switch with the little blue indicator light. Matches my dash perfect. Seriously though—hardest part was removing the old emblems.

Love the emblems
where did you get them