Trailer setup - bunks - for 1986 Sundancer 270

Seanior Moment

New Member
Jul 12, 2010
2
Ontario
Boat Info
270 Sundancer
Engines
305 Mercruiser with Alpha I drives
Does anyone have measurements of a hull to setup bunks on a trailer for a 1986 Sundancer 270? I just bought a Towmaster tri-axle trailer (31 foot model).:huh:
 
Does anyone have measurements of a hull to setup bunks on a trailer for a 1986 Sundancer 270? I just bought a Towmaster tri-axle trailer (31 foot model).:huh:

this info will likely be hard to come by....your best bet will be to have the boat and trailer at the same location and make the trailer adjustments as needed....you may can hire a marina to make the trailer adjustments as they lift and hold the boat over the trailer with a lift truck....proper fitting of the trailer to the boat is very important to insure the boat is supported properly to avoid warping of the hull while the boat is stored on the trailer for long periods of time....proper setup of the tounge weight is also important to insure proper tracking of the boat behind the tow vehicle...and the setup of the trailer winch is important to insure you have sized the winch properly for the size boat you have and to insure the boat can be retrieved without issue....

good luck...

cliff
 
Thanks Cliff,
I have located a 1984 Sundancer 270 that is out of the water - plan to go and measure this hull today - looks the same as my 1986 - hope that this will provide enough info to get the boat onto the trailer for more accurate fitting.
 

Forum statistics

Threads
112,945
Messages
1,422,738
Members
60,928
Latest member
rkaleda
Back
Top