Tilt and trim not working

Discussion in 'Gas Engines/Drives/Transmissions/Props' started by Loyd Dinneen, Oct 21, 2019.

  1. Loyd Dinneen

    Loyd Dinneen Active Member

    370
    Jul 29, 2017
    Las Vegas
    1977 Sea ray 240 SDA cruiser w/ twin 470 mercs.
    Twin 470 Mercruisers
    I have a 77 Sundancer 240 with twin 470's and MR pre alpha outdrives. I had a clear plastic hose come off the tilt and trim pump and pumped out the oil before I figured out the problem and now the outdrive is all the way up and the three button switch stopped working. I plan on checking the fuses and breaker and trim switch may have cut off power to the pump because it is too far extended. Any other ideas on what could cause the switch to suddenly stop working?
     

Share This Page

Show Sidebar