Those pesky screens...

Groucho

Well-Known Member
Jun 11, 2008
1,614
Albany/Lake George NY
Boat Info
2004 320 DA
Engines
6.2 V-Drives
Same as my prior 290...My 2004 320 has screens for the oval portholes. Am I missing something on how they are put in place? Is is just hold them against the porthole and use the little levers to kinda hold them inplace?
 
Same as my prior 290...My 2004 320 has screens for the oval portholes. Am I missing something on how they are put in place? Is is just hold them against the porthole and use the little levers to kinda hold them inplace?
My screens have little tabs around the outside that snap into the window. I always leave one tab out so I can get them back out again easily.

Is it possible these tabs are broken on your screens?
 
If your screens are the pop-in style (plastic frame), which it sounds like what you are saying, look at the rubber seal... there is a little groove going around the interior perimeter of the seal. The little tabs on the plastic frame fit into that.
 
If your screens are the pop-in style (plastic frame), which it sounds like what you are saying, look at the rubber seal... there is a little groove going around the interior perimeter of the seal. The little tabs on the plastic frame fit into that.


I'll try it, sounds logical...as I remember they don't appear to be a small enough diameter.
I'll report back....Thanks.
 
I typically use the levers for easy on-off but My screens have some print indicating that the screens should be removed for proper porthole closure.
 

Forum statistics

Threads
112,950
Messages
1,422,902
Members
60,933
Latest member
juliediane
Back
Top