SUNDANCER 290 - 1998 - CABIN SLIDING DOOR PROBLEM

[CoronCoron]

My sliding door doesn't slide open all the way. It stops about 2" short. The picture shows it stops before the black

"stopper" can be put in place.
Any ideas what I can do for a fix? Thank you

 

[Strecker25]

My sliding door doesn't slide open all the way. It stops about 2" short. The picture shows it stops before the black View attachment 115853 View attachment 115853 "stopper" can be put in place.
Any ideas what I can do for a fix? Thank you

same thing used to happen all the time on our 290. Tighten the Philips head screws that hold the track down. They back out and the door slide pincatches on the head of the screw.

the other possibility is something blocking it on the helm side. You can see that by opening up the fuse thing under the wheel and sticking a phone in there for a picture

 

[GirlyGirl1999]

Thanks guys, mine is the same. I’ll add it to the “list”

 

[Jeff Delbuono]

Mine stops about 1/2 inch short, i just push on bottom a bit to allow the lock to flap over

 

[Loneranger]

http://mysearayadventures.blogspot....upper-block-replacement.html?view=classic&m=1

You won’t need to disassemble yours to likely fix your problem. I post the above link because it is a good detailed write up of raising the door to replace parts if needed.