sliding door roller replacement

Discussion in 'Classic Sea Rays' started by jalfrenchie, Nov 23, 2020.

  1. jalfrenchie

    jalfrenchie New Member

    13
    Jul 6, 2010
    Port Huron Mi.
    1988 300 weekender
    350s
    I would like to replace the rollers on my sliding door on my 88 300 weekender. this is the door that openes to the cabin. Any ideas?
     
  2. J.Wilt

    J.Wilt Active Member SILVER Sponsor

    949
    Jan 29, 2010
    W. Mich. / Lake Michigan
    420 Sundancer 2005
    Cumming 6cta V Drives
    Highfield 310 , 20hp Suzuki
  3. Express 390

    Express 390 Active Member

    620
    Sep 14, 2018
    South Shore of Long Island NY
    1986 SeaRay 390 EC
    1993 SeaRay 290 DA single 7.4 /Bravo 2
    1992 SeaRay 230 DA 4.3LX Alfa drive
    Twin 454 Crusaders inboards 4 blades
    For some reason you can't find one try Home Depot , My boats an 86 I've replace the rollers three times i had to remove the roller from its bracket match up the size and reinstall it Works great. In fact it works so good while under way it will open and close if i don't lock it. Good luck where there's a will there's a way!
     
  4. northern

    northern Well-Known Member

    Jan 17, 2007
    Anacortes Washington
    380 Aft Cabin 1989 Charts Timezero radar Furuno
    Twin 454 strait shaft
    I replaced mine with ones that were for a shower door. Got them at a hardware store.
     
  5. jalfrenchie

    jalfrenchie New Member

    13
    Jul 6, 2010
    Port Huron Mi.
    1988 300 weekender
    350s
    thank you for the info. i think i found a replacement at reflect roller. waiting to recieve in mail. The roller I am replacing is the top roller and will see how it fits.
     
  6. WaltL

    WaltL New Member

    22
    Jul 19, 2020
    Athens, GA
    1985 390 EC
    454 Crusaders
    I need to do this job on my '85. Did you source your replacement rollers at Home Depot? Are top and bottom rollers the same? Do you happen to know which specific ones you used... link maybe?
     
  7. Express 390

    Express 390 Active Member

    620
    Sep 14, 2018
    South Shore of Long Island NY
    1986 SeaRay 390 EC
    1993 SeaRay 290 DA single 7.4 /Bravo 2
    1992 SeaRay 230 DA 4.3LX Alfa drive
    Twin 454 Crusaders inboards 4 blades
    The way my door is there are no rollers on top just the bottom . Yes i got them at Home Depot, you just have to match up the size of the roller. No i'm sorry i don't have any part #. GOOD LUCK !
    I think from 85 to 86 the door is a little different but basically the same idea. I had to pull the roller out of the carriage its mounted on and just change the roller.
     
    Last edited: Dec 2, 2020
  8. WaltL

    WaltL New Member

    22
    Jul 19, 2020
    Athens, GA
    1985 390 EC
    454 Crusaders
    Great, thank you for the info. This is on the top part of my "to do" list.
     
  9. Express 390

    Express 390 Active Member

    620
    Sep 14, 2018
    South Shore of Long Island NY
    1986 SeaRay 390 EC
    1993 SeaRay 290 DA single 7.4 /Bravo 2
    1992 SeaRay 230 DA 4.3LX Alfa drive
    Twin 454 Crusaders inboards 4 blades
    Let me know how you make out
     
    WaltL likes this.

Share This Page

Show Sidebar