Sliding Door for cabin

Discussion in 'Announcements & FAQs' started by CRoss, Mar 24, 2017.

  1. CRoss

    CRoss New Member

    Mar 24, 2017
    1995 EC400
    Cummings Diamond 315
    Has anyone had to replace the top sliding cabin door hardware on a EC400,1995. Mine has jumped track and needs new hardware, also need help to find parts. Sea Ray say you have to replace all track, slides etc., expensive.
  2. Gofirstclass

    Gofirstclass Well-Known Member

    Apr 20, 2010
    Tri Cities, WA
    1995 550 Sedan Bridge,
    2010 Boston Whaler 130 Super Sport,
    1981 Boston Whaler 130 Sport,
    CAT 3406C's, 580hp.
    I had to replace the lower track on my sliding door. To do it I called a local glass shop. It took them about 2 hours to take it all apart, replace the track and get it back together. I think the cost was somewhere around $150 IIRC.
  3. Tonka Boater

    Tonka Boater Active Member

    Jun 11, 2008
    Wayzata, MN
    1997 232 BR
    502 MAG, Bravo I
    The tracks have various nuances over the model years so there's not a single answer. Suffice it to say, some doors are pretty easy and some are a royal PIA. I had to replace the trucks (wheels) on the door on my 2008 280DA and it wasn't easy but it wasn't horrible. If you do a search, you will find some situations where the entire helm needs to be removed to fix the track and trucks.
  4. aquaholic

    aquaholic Member

    Jul 7, 2009
    new jersey
    37 express cruz, 3126 cats, all new garmin electronics,
    3126 cats
    flounder pounder .com will most likly have what you need
  5. Air O'Nautical

    Air O'Nautical Active Member

    Feb 5, 2008
    Stamford CT "Ponus Yacht Club"
    1995 400EC. Raymarine E80,4kw dome, Garmin 235 gps,
    2013 7.4L Mercruiser Blue water.
    Hurth straight shaft 630's,
    Westerbeke 7.0 BCG
    I have a 1995 400EC and went through this (mention in the “Official 400EC” thread).

    The trucks and track available from several sources are a different size than you need..
    The trucks you need is no longer made and are smaller than the newer ones available. The tracks should be OK.

    Find someone with a Digital printer that can make you the parts you need.

Share This Page

Show Sidebar