sb in gp
Active Member
I have a Shurflo 5901-0201 fresh water pump. It is the 5.7 GPM Extreme version.
I noticed some water in the forward bilge a few weeks ago and traced it to the pump. Assumed it was the gasket where the pump assembly connects to the motor housing. Took apart and put some permatex on it and screwed it back together. Still leaking. Digging further I realized that water is leaking into the motor assembly and then out. When I pulled the motor housing it was full of water. Here is a video where after I took the bottom mounting bracket off, the pump turns on and water comes pretty good out of the bracket holes.
https://www.youtube.com/watch?v=tHHGw6R76cU
My guess is that water is getting through the shaft seal. Pump is not that expensive, but it still works. Wondering if I should toss it and buy a new one or is it fixable.
Thanks,
Scott
I noticed some water in the forward bilge a few weeks ago and traced it to the pump. Assumed it was the gasket where the pump assembly connects to the motor housing. Took apart and put some permatex on it and screwed it back together. Still leaking. Digging further I realized that water is leaking into the motor assembly and then out. When I pulled the motor housing it was full of water. Here is a video where after I took the bottom mounting bracket off, the pump turns on and water comes pretty good out of the bracket holes.
https://www.youtube.com/watch?v=tHHGw6R76cU
My guess is that water is getting through the shaft seal. Pump is not that expensive, but it still works. Wondering if I should toss it and buy a new one or is it fixable.
Thanks,
Scott