Shore to ship Cable TV- sea ray 58 sedan bridge

[JulesAlexander]

I have connected cables for TV signal, but not working, is there something else I should be doing ?

 

[jsilvers]

Do you have a Glomex? If so, turn it off and see....

 

[tbirdvet]

I agree with silvers, need to turn knob on Glomex counterclockwise to off.

 

[Alex F]

If you have custom intallation of KVH and/or other equipment, then you'll need a lot more digging. My boat is a good example. My M5 and all other TVs were replaced. The techs cut off all original wires and ran new cables. Now I have to hunt for loose ends if I want to connect anything esle what they've left out (e.g. shore cable connection).

 

[Sea Gull]

I have never tried connecting mine because we only use the KVH, but if the above advice does not work you might try tuning through the VCR. Set your TV input to VCR and see what happens. Let me know if you need more help - I can test on my boat and let you know what I find.

 

[Jackie J V]

My guess is as Alex said...custom installation with a SAT probably cut off the shor connection. I know that is the case with my 560DB. I never use the shore connection though, so doesn't matter to me.

Paul