Searay system monitor

Jack38dancer

New Member
Jul 16, 2022
4
Lake Texoma
Boat Info
06 Sundancer 380, Raymarine E120
Engines
Twin 8.2 inboard
06 Searay 380, Got a call from a dock mate telling me what sounds like a high water alarm going off. Responded to find no issues and the only way to shut it off was to trip the circuit breaker on the main distribution panel.
Will the boat operate properly with the System Monitor off until I can get it fixed?
 
Thanks bbwhite. Have you had this issue?

Not that issue. My DDU on the dash is not communicating what the block in the bilge. I have changed the coax cable so not that. I have a new block to install in the bilge if life will slow down and give me time to do it. Mine says Data System Failure. Occasionally it works, most of the time not.

Bennett
 
  • Like
Reactions: RBB
We were getting the alarm constantly for the shower sump. Currently fix was to simply disconnect the red power leads to the dash unit. Of course also lose the full benefit of the unit till a more permanent repair.
 
Not that issue. My DDU on the dash is not communicating what the block in the bilge. I have changed the coax cable so not that. I have a new block to install in the bilge if life will slow down and give me time to do it. Mine says Data System Failure. Occasionally it works, most of the time not.

Bennett
That's what mine was saying until it went nuts today.
 

Forum statistics

Threads
112,945
Messages
1,422,747
Members
60,928
Latest member
rkaleda
Back
Top