SeaDek

[Riptide III]

I don't think anyone has commented on, and I may be wrong, the permanence on the other options vs seadek. Seadek will peel off if you ever decide to remove it. From what I understand, you are left with a mess from the bonding of the other options.

 

[Robski97]

Guys,
I have the plasdeck. Going on my 3rd season. No issues. This stuff does scratch . Drag a deck chair and ull see it . I made the decision on plasdeck after seeing two flexteek boats that were not maintained. The floors looked awful . They could not bring them back. ( the coloring is not tru and tru ) The glue used for both flex and plas is PERMANENT ! They rough up the floor with a sander before they apply the glue. So there is no going back to plain glass floor. I love the stuff. It does get really hot in the sun. Dont let anyone tell u it doesnt. I did not do the swim platform die to the heat factor and the dock lines. Crossing stern lines will be an issue marking the floor.

Just stuff to think about .

Rob

 

[Rocket]

Guys,
I have the plasdeck. Going on my 3rd season. No issues. This stuff does scratch . Drag a deck chair and ull see it . I made the decision on plasdeck after seeing two flexteek boats that were not maintained. The floors looked awful . They could not bring them back. ( the coloring is not tru and tru ) The glue used for both flex and plas is PERMANENT ! They rough up the floor with a sander before they apply the glue. So there is no going back to plain glass floor. I love the stuff. It does get really hot in the sun. Dont let anyone tell u it doesnt. I did not do the swim platform die to the heat factor and the dock lines. Crossing stern lines will be an issue marking the floor.

Just stuff to think about .

Rob

Rob, My installer told me that he doesnt alter the gelcoat deck at all. Just Glue down and if you wanted to pull up and remove it can be done. He did tell me that removing the glue is a tedious process though.

 

[Ray Ray]

I, too, just installed my Plasdeck and no grinding or sanding of nonskid was needed. Just spread the adhesive and lay it down.

 

[Robski97]

Ugh..... Now im depressed. In any event the flooring is great stuff , no more soggy carpets or peeling backing!!!

Rob