Right RPM at WOT

Discussion in 'General Discussion' started by bayboatersf, Apr 4, 2015.

  1. bayboatersf

    bayboatersf New Member

    36
    Jun 29, 2012
    San Francisco
    2000 Sea Ray 380
    Mercruisers 8.1
    I have posted this elsewhere with no answer so I try here.
    What should be the RPM at WOT for a 2000 Sea Ray 310 with 350 engines and V-drive?
    Thanks
     
  2. Lazy Daze

    Lazy Daze Well-Known Member TECHNICAL Contributor

    Apr 21, 2009
    PA
    Various
    Various
    Which 350 engine?
     
  3. bayboatersf

    bayboatersf New Member

    36
    Jun 29, 2012
    San Francisco
    2000 Sea Ray 380
    Mercruisers 8.1
    they are the 350 MAG MPI
     
  4. thegotoguyr

    thegotoguyr New Member

    201
    Mar 6, 2014
    Kelowna B.C.
    2003 220SD
    5.0 mpi Alpha 1
    4400- 4800, by my clymer manual. Rev limiter at 4900.
     
  5. aerobat77

    aerobat77 Member

    374
    Aug 12, 2014
    germany
    2006 240 DA Sundancer
    5.0 MPI / Bravo III
  6. thegotoguyr

    thegotoguyr New Member

    201
    Mar 6, 2014
    Kelowna B.C.
    2003 220SD
    5.0 mpi Alpha 1
    I got it from my clymer service manual, it shows 1998-2001 350 mag TBI and MPI max operating speed at 4400-4800 rpm.

    It shows 2002-2004 at 4600- 5000 rpm and 5.0 mpi the same.

    It also has rev limit activations on the same chart.
    I would take mercruiser specs over clymers if they are different.
    Is that for a 2000?
    I know many newer engines have higher limits.
     
    Last edited: Apr 6, 2015
  7. Tonka Boater

    Tonka Boater Active Member

    Jun 11, 2008
    Wayzata, MN
    1997 232 BR
    502 MAG, Bravo I
    I'm inclined to go with your numbers because they are for the model year of the OP's engines. The link from Aerobat are for the new 350's. My 1997 8.2L, for example, has different specs than the new 8.2's listed from that link. I have the same RPM range but the other specs are slightly different.

     

Share This Page

Show Sidebar