Replacement Sinks

[Jeffrey Wanko]

Forgive me if this question has been asked and answered. I have a 2008 SR Sundancer 290 and want to replace my cockpit sink and faucet. The size appears to be odd, 8 3/4" across, because I cannot find any that size. I looked at the manufacturer and the label says "Sterling Series 300 Stainless Steel," but I cannot find this size product anywhere.

Any help is greatly appreciated.

 

[Lazy Daze]

Are you sure you are measuring correctly? It sounds like you are measuring the opening and I would expect that the way the manufacturer measures it is from flange edge to flange edge, which likely makes it more like 10-something inches. Take a look at Sterling's website - and/or it's quite possible that the sink is still in use by Sea Ray and your dealer can get it for you. I'd be surprised if it was any more than about $75 or so through a dealer.

 

[Jeffrey Wanko]

Thank you for the quick response. I uploaded a picture. The opening looks like 8 3/4" so I was estimating a bowl of 9".

 

[Lazy Daze]

The lip will be much larger than an 1/8". Did you find anything on the manufacturer's website?

 

[Jeffrey Wanko]

Yes, I did, and the only one on their website is a 13 5/8" round sink. I will check with a Sea Ray dealer, but was hoping I could find myself online.

 

[TNT8808]

Yes, I did, and the only one on their website is a 13 5/8" round sink. I will check with a Sea Ray dealer, but was hoping I could find myself online.

I've sourced them through Scandvik and had good luck in the past.

-Tom

 

[Lazy Daze]

I've sourced them through Scandvik and had good luck in the past.

-Tom

Looks like the one for $85 might be it? https://www.sterlingplumbing.com/browse/Bathroom/Bathroom+Sinks/Basin+Shape/Round

 

[Jeffrey Wanko]

Wow, yes, I think so. I was looking under "Kitchen| Bar & Prep Sinks" Thank you!!!

 

[atrick]

In the sterling catalog they list a 10 1/2" undermount stainless sink with 2" drain, list price is $85 so should be able to get it for 50 or 60 bucks