Replacement panel

OEM Sea Ray Electrical Switch Pad STBD Module Rv3 Searay1810626 https://ebay.us/SQMIm5 is $442.00. My vent switch will not trip open, only close. This appears to be an expensive replacement part. Any suggestions?

I would look at the actuator. If all your other keypad functions work it is probably an electrical or mechanical issue rather than the switch. I have a similar problem with mine - it will open but sometimes doesn't like to close. Seems to lock up from lack of use.

-Kevin
 
OEM Sea Ray Electrical Switch Pad STBD Module Rv3 Searay1810626 https://ebay.us/SQMIm5 is $442.00. My vent switch will not trip open, only close. This appears to be an expensive replacement part. Any suggestions?

Not familiar with that particular switch planner but most of these units can he cleaned and made serviceable again. I would see about taking the backing off, clean and then reseal.
And like KevinC mentioned, that vent actuator can jam. Did on my 40DA. Once again, take it off and clean it real good.
Hey, it's a shot.
 

Forum statistics

Threads
112,950
Messages
1,422,835
Members
60,931
Latest member
Ebrown69
Back
Top